Pnp Receiver Selection And Installation - E-FLITE Carbon-Z Cub SS Instruction Manual

PNP Receiver Selection and Installation

The recommended receiver for this aircraft is the Spektrum AR636.
If you choose to install a different receiver, ensure that it is at least a 6-channel
full range (sport) receiver. Refer to the manual of your chosen receiver for correct
installation and operation instructions.
AR636 Installation
1. Remove the screw (A) and radio hatch (B) from the top of the fuselage.
2. Attach the appropriate control surfaces servo leads to the their respective ports
on the receiver using the table at the right.
3. Using double-sided servo tape, mount the receiver on the receiver platform,.
The receiver should be mounted parallel to the length of the fuselage, with the
label facing up and the servo ports facing the rear of the aircraft, as shown. The
orientation of the receiver is critical for all AS3X
CAUTION: Incorrect installation of the receiver could cause a crash.
® and SAFE ® technology setups.
1 = Throttle
2 = Aileron
3 = Elevator
4 = Rudder
5 = Gear
6 = Flaps
(A) 3 x 30mm
Button head hex machine
EN
B
11