E-FLITE Taylorcraft 450 ARF Assembly Manual page 16

8. Finally, apply epoxy to the root ribs that will come in

contact with each other. Slide the panels together and use
low-tack tape to hold the two panels together until the
epoxy has fully cured.
9. Use medium CA to glue the wing dowels in position.

They will slide in the wing until they are flush with the
back side of the wing center section.
16
10. Attach the skylight to the wing using eight 2mm x

6mm sheet metal screws using a #1 Phillips screwdriver.
Leave the screws slightly loose until they have all been
started so you can adjust the position of the window.
11. Lightly score the wing bolt brace so it can bend to

conform to the dihedral in the wing when installed.
E-flite Taylorcraft ARF Assembly Manual