Joining the Wing Panels
Required Parts
Wing (R&L)
Wing dowel (2)
Wing bolt brace
2mm x 6mm sheet metal screw (8)
Required Tools and Adhesives
Pencil
Mixing stick
Hobby knife w#11 blade
Medium CA
Medium grit sandpaper
Rubbing alcohol
1. Use a pencil to mark the wing panel and joiner so you
can return the joiner into the orientation in which it was
fit into the wing panels.
14
Wing joiner
Skylight window
30-minute epoxy
Epoxy brush
Felt-tipped pen
Low-tack masking tape
Paper towels
#1 Phillips screwdriver
2. Slide the wing joiner into the wing panel. It may be
necessary to sand it lightly for the best fit.
3. Use a pencil to draw a line on the joiner against
the wing.
E-flite Taylorcraft ARF Assembly Manual