Part 3: Repair Information
1.5 Body Serial Number Position
This is a serial number for after-service information.
1.6 Flexible Connectors
The product uses three kinds of the locking connector.
[1] Type A
UNLOCK
1. Before inserting or removing the flexible cable,
2. The Type B has a two-stage connection
CAUTION
3. The flexible cable has holes for insertion and
The connector
should face
UNLOCK
downwards
Unlocked
The connector
should face
upwards
Unlocked
Fig. 3-5 Flexible connectors
be sure to unlock the connector. After
insertion, be sure to lock it.
structure. Insert it to the deep end to avoid
short-circuiting the terminals. Insert it so that
the clearance between the cut-out of the
flexible cable reinforcement plate and the
connector is about 0.3 mm.
removal. Use them for removal and insertion
by inserting the tweezers into the holes as
required. (Fig. 3-7)
Products for sale start from No. 0110100001.
X X X X X X X X X X
Serial No. (00001~99999)
Classification No. (01~99)
Type of model (1. NTSC (DOM), 2. NTSC (USA, CAN),
3. PAL)
Date of production (2002, JAN.=00~2003, oct.=21)
[2] Type B
Unlocked
[3] Type C
3-4
The connector
should face
UNLOCK
downwards
Holes
Fig. 3-6 Holes for removal
Flex holes