Canon EOS D60 Instructions Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Digital Camera
  5. EOS D60
  6. Instructions manual

Canon EOS D60 Instructions Manual

Canon eos d60: user guide
Hide thumbs Also See for EOS D60:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Owner's Manual
INSTRUCTIONS
Be sure to read these Instructions before using
E
your camera for the first time. Keep this booklet
E
handy for easy reference.
English Edition

Advertisement

Table of Contents
loading

Related Manuals for Canon EOS D60

Summary of Contents for Canon EOS D60

  • Page 1 INSTRUCTIONS Be sure to read these Instructions before using your camera for the first time. Keep this booklet handy for easy reference. English Edition...
  • Page 2 CMOS sensor having approx. 6.3 million effective pixels. The camera is compatible with all Canon EF lenses and designed for quick and easy shooting. It is full-featured for all types of photography, from fully automatic snapshooting to professional-level, creative work.

  • Page 3: Equipment Check List

    Be sure all the following equipment and accessories have been included with your camera. If anything is missing, contact your dealer. ¢ EOS D60 camera body (with body cap and lithium backup battery for the date and time) ¢ Eyecup Eb ¢...

  • Page 4: Table Of Contents

    Contents Introduction Equipment Check List ... 3 Handling Precautions ... 10 Quick Guide ... 12 Nomenclature ... 14 Conventions Used in This Manual ... 20 Before You Start ... 21 Charging the Battery Pack ... 22 Inserting and Removing the Battery Pack ... 24 Inserting the Battery Pack ...
  • Page 5 Flash Exposure Compensation .. 95 Modeling Flash ... 95 Wireless Multi-Flash/E-TTL Autoflash Shooting ... 95 Using Non-Canon Flash Units ... 96 TTL and A-TTL Speedlites ... 96 Playing and Erasing Recorded Images ... 97 Viewing Recorded Images ... 98 Viewing a Single Image ... 98 Viewing the Index ...
  • Page 6 — Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subject B of Part 15 on the FCC rules.

  • Page 7: Safety Precautions

    Failure to do so may result in fire or electrical shock. Set the camera’s main switch to the OFF position and remove the camera battery or unplug the power cord from the electrical outlet immediately. Please consult your camera distributor or the closest Canon Customer Support.
  • Page 8 • The camera terminal of the compact power cord is designed for exclusive use with the EOS D60. Do not use it with other products or batteries. There is a risk of fire and other hazards.

  • Page 9: Preventing Malfunctions

    CAUTIONS • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries.

  • Page 10: Handling Precautions

    (2) The camera is not waterproof and should not be used in wet conditions or underwater. If the camera gets wet, take it to your nearest Canon dealer as soon as possible. If small amounts of water splash onto the camera, wipe it with a clean dry cloth. If the camera is exposed to salty air, wipe it thoroughly with a slightly damp cloth.
  • Page 11 (4) Do not spill liquids onto CF cards. (5) Always store your CF cards in a case or cabinet to protect the data stored on them. (6) Use only CF cards specified by Canon. Otherwise, you may be unable to record or play back images.

  • Page 12: Quick Guide

    Press the cover closed until it clicks shut. (→24) Insert a CF card (optional). After inserting the CF card, close the cover. (→28) ● Using CF cards made by Canon is recommended. Take the shot. Press the shutter button down fully. (→29)
  • Page 13 Mount the lens. Align the red dots on the lens and camera and turn the lens in the direction shown by the arrow in the diagram until it clicks into place. (→27) Turn on the camera. Turn the main switch to <ON>. (→29) Check the image.

  • Page 14: Nomenclature

    Nomenclature 〈DRIVE〉 Drive mode selection button (→63) 〈 〉 Metering mode selection/ Flash exposure compensation button (→61, 91) LCD panel (→16) 〈 〉 Main dial (→30) Shutter button (→29) Grip (Battery chamber) DC coupler cord hole (→26) Red-eye reduction/ Self-timer lamp (→89, 81) AF-assist lamp (→39) Mirror (→84, 115) DIGITAL terminal...
  • Page 15 Eyecup (→82) Viewfinder eyepiece Main switch (→29) 〈MENU〉 Menu button (→32) 〈INFO.〉 Info button (→60, 100) 〈JUMP〉 Jump button (→99) 〈 〉 Index/ Enlarge button (→98, 99) 〈 〉 Playback button (→40, 98) LCD monitor (→32) 〈 〉 Erase button (→43, 104) Tripod socket Date/time battery compartment cover (→113) 〈...

  • Page 16: Lcd Panel

    Nomenclature LCD Panel Shutter speed ( Data processing ( Date/time battery level warning ( Cleaning warning ( Parameters ( ISO Speed ( No CF card warning ( CF full warning ( CF error warning ( AF point ( Error cod ( Cleaning ( Quality Large/Fine...

  • Page 17: Viewfinder Information

    Viewfinder Information New laser matte screen AE lock/FE lock AEB in progress Flash-ready indicator FE lock underexposure warning High-speed sync (FP flash) Flash exposure compensation Shutter speed ( FE lock ( Data processing ( Aperture value ( The above diagram shows the LCD panel with all icons and indicators displayed. In actual use, the items displayed differ according to the camera settings.

  • Page 18: Mode Dial

    Nomenclature Mode Dial The Mode Dial is divided into two functional zones. 1 1 1 1 1 Basic zone ● All you do is press the shutter button. : Full Auto (→38) Lets you take fully automatic pictures—the camera makes all the settings.
  • Page 19 Compact Power Adapter CA-PS400 Power cord (→22, 26) Power cord socket (→22, 26) Plug in power cord here. Back DC Coupler DR-400 DC coupler plug (→26) Plug into DC coupler socket of compact power adapter. Nomenclature Battery pack connectors (→22) Attach battery packs for charging.

  • Page 20: Conventions Used In This Manual

    ● Reference page numbers are indicated by (→✽✽) . ● The procedures in this instraction use a Canon EF 24-85mm f/3.5-4.5 USM lens for reference. ● The descriptions also assume that the menu functions and custom functions are set to the default settings.

  • Page 21: Before You Start

    Before You Start This chapter describes preparations and settings you need to make before you start shooting, as well as how the shutter button operates. Attaching the Strap Pass the end of the strap through the strap mount from beneath, then back in and out of the strap clasp as shown.

  • Page 22: Charging The Battery Pack

    Charging the Battery Pack < –> mark Battery charge Charge lamp Blinks once per 0–50% second Blinks twice per 50–75% second Blinks three times Over 75% per second Almost full Stays on Connect the power cord. ● Connect the power cord to the compact power adapter.
  • Page 23 Charging the Battery Pack ● When the DC coupler is connected to the compact power adapter, the adapter cannot be used to charge battery packs. ● Do not charge any battery packs other than model BP-511. ● When the battery pack is in the camera, it discharges slightly all the time even when the camera is not used.

  • Page 24: Inserting And Removing The Battery Pack

    Inserting and Removing the Battery Pack Inserting the Battery Pack Load a fully charged BP-511 battery pack into the camera. Battery Pack BP-512 cannot be used with this camera. Battery Level Icons The level of charge remaining is shown in three stages when the Main Switch is set to < ON>. (→29) If the level of charge remaining runs out when you are using the menu screen or playing back an image, a no battery warning appears on the LCD monitor.

  • Page 25: Removing The Battery Pack

    Low (0°C/32°F) Approx. 480 ● The above figures were obtained under Canon test conditions (fully charged battery, EF 50mm f/1.4 USM lens, Review function [On], Review Time [2 sec.], Quality [Large ● The number of shots may be less than indicated in some cases, due to differences in operating conditions.

  • Page 26: Using A Household Power Supply

    Using a Household Power Supply You can operate the EOS D60 from a household power outlet by using the DC coupler. This enables you to use the camera as long as you like without a battery. ● Do not use any DC coupler other than the one provided with your EOS D30 or D60 camera.

  • Page 27: Mounting And Detaching A Lens

    Lens mount index Detaching a Lens ● Since the EOS D60’s picture coverage is smaller than the normal 35mm film format (see illustration), the EF lens attached to the camera will have a telephoto effect equivalent to 1.6 times the lens focal length.

  • Page 28: Installing A Cf Card

    Slide the cover in the direction shown by the arrow, and open it as shown in the diagram. Insert the CF card. ● Using CF cards made by Canon is recom- mended. ● With the CF card label side (the side with the printed...

  • Page 29: Basic Operation

    Basic Operation Main Switch The camera operates only after the Main Switch is set to <ON >. ● To save battery power, the camera automatically turns off if you do not operate it for approximately one minute (Auto power off function). To use the camera again, press the shutter button down halfway, or set the Main Switch to <...

  • Page 30: Using The Electronic Dials

    Basic Operation Using the Electronic Dials (1) Press a button and turn the < When you press a button, its function remains active while a timer ( 6 ) runs. During this time you can turn the < > dial and view the settings on the LCD panel. When the timer runs out or you press the shutter button down halfway, the camera is ready to take a picture.

  • Page 31: Lcd Monitor

    (1) Press a button and turn the < Use the dial this way to select and set the white balance, drive mode and flash exposure compensation. (2) Just turn the < > dial. ● When you are taking pictures, use the dial to set the exposure compensation and manual aperture value.

  • Page 32: Menu Functions And Settings

    Basic Operation Menu Functions and Settings The Canon EOS D60 uses menu functions to set functions such as the quality, the date and time, and Custom Function settings. To use the menu functions, look at the LCD monitor and use the <MENU> button, <...

  • Page 33: Menu Selections And Default Settings

    Menu Selections and Default Settings On the Menu screen, items and settings are shown in different colors according to the functions they control. Selected items are enclosed in a color frame. Menu item Setting indicated by color frame Menu item Quality ∗2 Red-eye on/off...

  • Page 34: Setting The Date And Time

    Setting the Date and Time Set the date and time as shown below. The date and time are recorded with the image data for each photographed image. From the Menu, select [Date/ Time]. ● Press the < MENU> button. ● Turn the <...
  • Page 35 ● Each photographed image is recorded with the date and time it was taken. If the date and time are not set, they cannot be recorded correctly. Make sure you set the date and time correctly. ● The date and time setting is maintained by the date/time battery. Setting the Date and Time Press the <...

  • Page 36: Dioptric Adjustment In The Viewfinder

    Dioptric Adjustment in the Viewfinder Use the dioptric adjustment in the viewfinder to best suit your eyesight. This adjustment can enable eyeglass wearers to see through the viewfinder clearly, even without their eyeglasses. The camera’s adjustable dioptric range is –3 to +1 dpt. If the viewfinder image still does not look sharp after adjusting the diopter adjustment knob, try one of the E-series dioptric adjustment lenses (optional).

  • Page 37: Simple Picture Taking

    Simple Picture This chapter describes how to use the camera’s Basic Zone modes< < > for quick and easy shooting. In these modes, all you do is point and shoot. In addition, to help prevent mistakes caused by operating the camera improperly, the < Basic zone the <...

  • Page 38: Fully Automatic Picture Taking

    You can easily and confidently take pictures of any subject, with no need to do anything but press the shutter button. The Canon EOS D60 can capture subjects at any of three AF points, so that anybody can take great pictures easily.

  • Page 39: Automatic Built-In Flash

    ● The built-in AF-assist beam’s maximum range is 3.8 meters /12.5 ft. ● When an EX-series external Canon Speedlite (optional) is used, the AF-assist beam will be emitted either by the camera or external Speedlite depending on the shooting conditions.

  • Page 40: Check The Image Immediately

    Check the Image Immediately You can view the images you take immediately, on the LCD monitor on the back of the camera. ● You can turn the Review function on or off, as well as display the image information display. (→41) ●...

  • Page 41: Checking The Image After It Is Taken

    Checking the Image After it is Taken You can set the camera to display each image on the LCD monitor as soon as it is taken. You can do this two ways: Select [On] to display the image by itself, or select [On (Info)] (→100) to display the image with its recording information.

  • Page 42: Time For Image Review

    Check the Image Immediately Time for Image Review You can control how long images are displayed by setting the review time to [2 sec.], [4 sec.], [8 sec.], or [Hold] which keeps the image on the monitor screen. The default setting is [2 sec.]. ●...

  • Page 43: Erasing A Recorded Image (Single Image Erase)

    Erasing a Recorded Image (Single Image Erase) You cannot recover an image once you have erased it. Make sure you no longer want an image before erasing it. ● You can protect images (→103) to prevent them from being erased accidentally. ●...

  • Page 44: Portrait Mode

    Portrait Mode The image quality can also be set. (→50, 118) ● Head-and-shoulder shots give the best background blur effect. Also, the farther the subject is from the background, the more blurred the background will appear. ● Use a telephoto lens to blur the background even more. If you use a zoom lens, its longest focal length is the most effective (for example, a 24-85mm lens set to 85 mm).

  • Page 45: Landscape Mode

    Landscape Mode If the shutter speed indicator blinks, the shutter speed may be too slow to keep the picture from being blurred by camera shake. We recommend you use a tripod when taking landscape pictures. (The shutter speed indicator still blinks if you use a tripod, but camera shake will not be a problem.) ●...

  • Page 46: Close-Up Mode

    Close-Up Mode The image quality can also be set. (→50, 118) ● Close-up mode is most effective when the subject is at the minimum focusing distance of the lens. ● If you use a zoom lens, use its longest focal length to get a higher magnifica- tion.

  • Page 47: Sports Mode

    Sports Mode If the shutter speed indicator blinks, the shutter speed may be too slow to keep the picture from being blurred by camera shake. Be careful to hold the camera steady and press the shutter button smoothly, or use a tripod. (The shutter speed indicator still blinks if you use a tripod, but camera shake will not be a problem.) ●...

  • Page 48: Night Portrait Mode

    Night Portrait Mode To prevent camera shake, always use a tripod. ● If you are taking images of scenery only (and not people), use Landscape < mode. ● Tell your subjects not to move for a few seconds after the flash fires. ●...

  • Page 49: Advanced Operations

    Advanced Operations Creative zone The Creative zone features shooting modes that let you select the shutter speed or aperture value and change the exposure yourself, providing you with more flexibility to set up the camera for a variety of shooting styles. This chapter describes how to make effective use of each of these functions.

  • Page 50: Quality Selection

    ● You can set the image quality also for the Basic Zone modes. ● The CF card's maximum capacity is based on Canon's testing standards (at ISO 100). ● The maximum capacity applies to a 128 MB CF card. ●...

  • Page 51: Iso Speed

    Conversely, lower speeds are less suited to moving subjects or dim conditions, but produce sharper, more detailed images. The Canon EOS D60 provides ISO-equivalent speed settings from ISO 100 to ISO 1000, in full-stop increments. The default setting is ISO 100.

  • Page 52: Setting Processing Parameters

    Setting Processing Parameters Contents of processing for the captured image (parameters: [contrast], [sharpness],[saturation] and [color tone]) can be set with the camera, and you can set and register up to three sets of parameters. Defaut setting is “standard” (0 for all parameters). Parameter Setting Adjusts the...
  • Page 53 You can set the processing parameter by pressing < < > dial while looking at the LCD panel. (C.Fn-12-3→126) Setting Processing Parameters Select the parameter to be set. ● Turn the < > dial to select the parameter, then press < >.

  • Page 54: Af Mode Selection

    AF mode selection is available in all Creative zone settings except for < ● In addition to the above two AF modes, the EOS D60 provides AI Focus AF, which automatically switches between One-shot and AI Servo AF modes according to the state of the subject. AI Focus AF is automatically selected when operating in <...

  • Page 55: One-Shot Af For Still Subjects

    One-Shot AF for Still Subjects If the camera cannot focus, the focus confirmation light ( ● ) in the viewfinder blinks. If this happens, you will not be able to take a picture even if you press the shutter button down fully. Instead, reframe the shot and focus again. See also, “Manual Focus”...

  • Page 56: Ai Servo Af For Moving Subjects

    AF Mode Selection AI Servo AF for Moving Subjects ● The focus confirmation light < ●> will not light and the beeper will not sound when focus is achieved. ● When focus is not achieved, the focus confirmation light <● > will blink. ●...

  • Page 57: Af Point Selection

    AF Point Selection The AF point can be selected automatically or manually. In the Basic Zone modes and < mode, AF point selection will be automatic. In the < >, < point selection can be set to either automatic or manual. Automatic selection : The camera selects the AF point automatically according to conditions.

  • Page 58: Focusing On An Off-Center Subject

    Focusing On an Off-Center Subject To focus on a subject not covered by one of the three AF points, follow the procedure below. This technique is called Focus Lock. Focus lock is valid when the AF mode is set to One-shot AF. You can also use the Focus lock function in the Basic Zone (except for <...

  • Page 59: Problem Subjects For Autofocusing

    Problem Subjects for Autofocusing The EOS D60 has a precision AF system that can focus on most subjects. However, it may not be able to focus on subjects (focus confirmation light < ●> blinks) in particular conditions such as the following: Difficult-to-Focus Subjects ●...

  • Page 60: Info

    INFO. Checking Camera Settings When the camera is ready to shoot, press the <INFO.> button to view the current camera settings on the LCD monitor. Camera Setting Information Auto power off time (→29, 120) Review (→41), Review time (→42) Parameters (→52) C.Fn (Custom Function) number(s) (→122) Flash exposure...

  • Page 61: Selecting A Metering Mode

    Selecting a Metering Mode The EOS D60 uses three modes for metering: Evaluative, Partial, and Center-weighted average. The Basic Zone uses evaluative metering. In the Creative zone, any of the three modes can be selected. Turn the < > dial to set the flash exposure compensation for the built-in/optional flash (→91).

  • Page 62: Metering Modes

    Metering Modes : Evaluative Metering This is an all-around metering mode suited even for backlit subjects. The viewfinder field is divided into 35 metering zones to which the three AF points are linked for evaluative metering. The camera deter- mines the main subject’s size, position, brightness, background, front and back lighting, etc., so that it can select the proper exposure for the subject at all times.

  • Page 63: Selecting A Drive Mode

    Selecting a Drive Mode You can set the EOS D60’s drive mode to single-frame shooting, continuous shooting or self- timer operation. Single-frame shooting < >: Press the shutter button to take one image. Continuous shooting < >: You can use the continuous shooting mode by pressing and holding the shutter button.

  • Page 64: Setting The White Balance

    CF card after the access lamp stops blinking. Setting the White Balance The EOS D60 has seven white balance settings, Auto, Daylight, Cloudy, Tungsten, Fluores- cent, Flash, and Custom. In the Basic Zone the Auto setting is selected automatically, while in the Creative zone you can select any of the seven white balance settings.

  • Page 65: White Balance Settings

    White Balance Settings In light from any source, the proportion of the primary colors (red, green, blue) in the light varies according to the color temperature. Higher color temperatures contain a greater proportion of blue, and lower color temperatures contain a greater proportion of red. Moving from low to high, the progression is red →...

  • Page 66: Custom White Balance Setting

    Custom White Balance Setting Custom white balance lets you set the white balance yourself by photographing a white subject to use as the basis for the camera’s white balance, and then selecting that picture for use as white balance data. Partial metering zone Photograph a white subject.

  • Page 67: Lcd Panel Illumination

    ● For best results, use subjects such as plain white paper for white balance basis. ● White balance data is loaded from the partial metering zone (→17). ● You can store white subjects photographed under various conditions on the CF card, then select these images as needed for the [Custom WB] function as an easy way of setting the ideal white balance for any lighting conditions.

  • Page 68: Program Ae

    Program AE Like < > (Full Auto) mode, this is a general- purpose picture-taking mode. The camera automati- cally sets the shutter speed and aperture value to suit the scene’s brightness. This is called Program ∗ stands for Program ∗ AE stands for Auto Exposure Set the Mode Dial to <...

  • Page 69: Shifting The Program

    Differences Between Program AE Mode < > and Full Auto Mode < ● < > (Program AE) and < > (Full Auto) mode are alike in that both automatically deter- mine the shutter speed and aperture values. ● The following functions can be used in < > mode but not in < •...

  • Page 70: Shutter-Priority Ae

    Shutter-Priority AE In this mode, you set the shutter speed, and the camera automatically sets the aperture value to suit the brightness of the subject. This is called Shutter-Priority AE. A fast shutter speed can freeze the motion of a fast-moving subject, and a slow shutter speed can blur the subject to give the impression of motion.
  • Page 71 Shutter Speed Display You can set the shutter speed in half-stop increments as shown below. The shutter speeds from 4000 to 4 indicate the denominator of the fractional shutter speed, so that—for example—125 is 1/125 second. For slow speeds, 0”7 is 0.7 seconds, and 15”...

  • Page 72: Aperture-Priority Ae

    Aperture-Priority AE In this mode, you set the aperture value, and the camera automatically sets the shutter speed to suit the brightness of the scene. This is called Aperture-Priority AE. By setting a smaller aperture value (larger aperture), you can blur the background to make the subject stand out as in a portrait.

  • Page 73: Checking The Depth Of Field

    Aperture Value Display You can set the aperture in half stops as shown below. The higher the aperture value, the smaller the aperture opening. The range of aperture settings displayed depends on the lens mounted on the camera. 1.0 1.2 1.4 1.8 2.0 2.5 2.8 3.5 4.0 4.5 5.6 6.7 8.0 9.5 11 13 16 19 22 27 32 38 45 54 64 76 91 If no lens is mounted on the camera, the aperture setting is displayed as 00.

  • Page 74: Manual Exposure

    Manual Exposure In this mode you set the shutter speed and aperture value yourself. The camera makes no settings automatically. You can determine the correct combination of shutter speed and aperture value by checking the exposure level displayed in the camera.

  • Page 75: Take The Picture

    Standard exposure Underexposure Overexposure You can set the camera so that you can set the shutter speed or aperture value in 1/3-stop increments. (C.Fn-4-1→122) Determine the exposure. ● Set the shutter speed or aperture value manually. : This is the standard reference point for a correct exposure.

  • Page 76: Automatic Depth-Of-Field Ae

    Automatic Depth-of-Field AE When taking pictures of large groups or landscapes, the EOS D60 can automatically achieve a sharp focus over a wide depth of field. All the subjects covered by the AF points, from those close to the camera to those far away from the camera, can be taken clearly.

  • Page 77: Setting Exposure Compensation

    Setting Exposure Compensation Exposure compensation is used to alter the camera’s standard exposure setting to make the picture brighter (increased exposure) or darker (decreased exposure). Exposure compensation can be set up to +/–2 stops, in 1/2-stop increments. ● To prevent the < >...

  • Page 78: Autoexposure Bracketing

    Autoexposure Bracketing When using autoexposure bracketing, the camera automatically changes the exposure level within the set range (up to +/–2 stops in 1/2-stop increments) for three successive frames. This is called AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected drive mode (→63) in the following order: correct exposure, decreased exposure, and increased exposure.
  • Page 79 ● Neither flash nor bulb exposures can be used in AEB mode. ● If you set mirror lockup with C.Fn-3-1 and then use AEB, single-frame shooting takes effect even if the drive mode is set to continuous shooting. ● To indicate that AEB is in progress, the < the <...

  • Page 80: Ae Lock

    AE Lock AE lock enables you to lock the exposure at a place other than the point of focus. After locking the exposure, you can recompose the shot while maintaining the exposure level. This feature is useful for backlit and spotlighted subjects. ●...

  • Page 81: Self-Timer Operation

    Self-timer Operation The self-timer is convenient for group photographs. You can use it in any Basic mode or Creative mode. We recommend using a tripod when you use the self-timer. Do not stand in front of the camera when you press the shutter button to start the self-timer.

  • Page 82: Using The Eyepiece Cover

    Self-timer Operation Using the Eyepiece Cover If you take a picture using the self-timer or remote switch (optional) without looking through the viewfinder, stray light can enter the eyepiece and affect the exposure. To prevent this, attach the eyepiece cover to the viewfinder eyepiece before taking the picture. Remove the eyecup.

  • Page 83: Bulb Exposures

    Bulb Exposures In a bulb exposure, the shutter remains open as long as you hold the shutter button down, and closes when you release it. Bulb exposures are useful for the long exposures required for night scenes, fireworks, etc. The elapsed exposure time displayed on the LCD panel is only counted up to 999 seconds.

  • Page 84: Mirror Lockup

    Mirror Lockup Mirror lock is enabled with C.Fn-3-1 (→122). This function raises the mirror and exposes the picture, in separate operations. It is useful for close-up shots or when using a super telephoto lens, where the mirror shock could affect the picture. ●...

  • Page 85: Flash Photography

    Flash Photography The EOS D60 can take easy, natural-looking flash pictures with correct subject illumination using E-TTL autoflash (preflash evalua- tive metering in memory) and either the camera’s built-in flash or any EOS-dedicated EX-series Speedlite. The procedure is as easy as a normal AE shot.

  • Page 86: Using The Built-In Flash

    Using the Built-in Flash The built-in flash lets you take the following kinds of flash pictures with the ease of a normal AE shot. ● E-TTL autoflash E-TTL autoflash (preflash evaluative metering in memory) supplies the correct level of flash for the subject in the AF point selected by AF.

  • Page 87: Built-In Flash Range

    Built-in Flash Range ISO Speed 1000 Approx. 1-10.8 m (3.3-35.4 ft) Flash Sync Shutter Speed and Aperture Settings Sync shutter speed Mode Automatically set from 1/200 to 1/60 second. Manually set to speeds slower than 1/200 second. Automatically set (1/200 to 30 sec.) for the metered brightness, according to the aperture value.
  • Page 88 Using the Built-in Flash ● When using an EX-series Speedlite (→92), press the built-in flash back into the camera before mounting the external flash. ● When using the built-in flash, keep at least 1 m/3.3 ft away from the subject. Otherwise the lens barrel may partially obstruct the flash and cause part of the photo to look dark.

  • Page 89: Red-Eye Reduction

    Red-eye Reduction When you use flash in low-light conditions, it can reflect off your subject’s pupils and make their eyes look red in the recorded imge. This effect is called “red-eye,” and is caused by the light of the flash reflecting off the retina of the eye. The Red-eye reduction function uses the camera’s red-eye reduction lamp, which gently shines into the subject’s eyes to constrict the pupils and thereby reduces the likelihood that red-eye will occur.

  • Page 90: Fe Lock

    Using the Built-in Flash FE Lock FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a subject. FE Lock is a function in the Creative zone. If the subject is far enough away to cause underexposure, the < > icon will blink in the viewfinder.

  • Page 91: Flash Exposure Compensation

    Flash Exposure Compensation The EOS D60 camera can adjust the level of the built-in flash or any EX-series Speedlite. The compensation amount can be up to +/–2 stops in 1/2-stop increments. You cannot use flash exposure compensation in the Basic Zone.

  • Page 92: Flash Photography With The Eos-Dedicated 550Ex Speedlite

    Flash Photography with the EOS-Dedicated 550EX Speedlite The Canon 550EX Speedlite allows you to take high-quality flash pictures easily, in the same way as you would with a built-in flash. ● E-TTL Autoflash E-TTL autoflash (preflash evaluative metering in memory) supplies the correct level of flash for the subject in the AF point selected by AF.

  • Page 93: Full Auto Flash

    Full Auto Flash Using the < > (Program AE) mode with E-TTL autoflash is described below. Regarding the operation of the 550EX, refer to the Speedlite's instructions. MODE PILOT Taking Flash Pictures in Each Shooting Mode Even in < >, < >, and <...

  • Page 94: High-Speed Sync (Fp Flash)

    Flash Photography with the EOS-Dedicated 550EX Speedlite High-Speed Sync (FP Flash) When the 550EX Speedlite is set to high-speed sync < synchronize at any shutter speed of 1/200 second or faster, thus providing high-speed sync (FP) flash operation. When high-speed sync is On, the < High-speed sync is effective for portrait photography in the following situations: (1) When you want to use daylight sync flash for a portrait, and widen the aperture (reduce the aperture value) to blur the background.

  • Page 95: Fe Lock

    FE Lock The procedure for setting FE lock is the same as with the built-in flash (→90). FE lock works in both the normal flash and high-speed sync (FP flash) modes. Flash Exposure Compensation For flash pictures with flash exposure compensation, see “Flash Exposure Compensation” for the built-in flash.

  • Page 96: Using Non-Canon Flash Units

    Only the X-sync terminal is used for synchronization at 1/200 second or slower. ● If you use the EOS D60 with a flash unit or flash accessory built for another brand of camera, the EOS D60 may not operate properly. ●...

  • Page 97: Playing And Erasing Recorded Images

    About Image Data Taken or Recorded by Other Devices The EOS D60 may in some cases be unable to accurately display images taken with other cameras, or taken with the EOS D60 but subsequently had image data or file names modified by computer or other means.

  • Page 98: Viewing Recorded Images

    Viewing Recorded Images The EOS D60 can display recorded images on its LCD monitor. You can view these images in single-image format, index format, or enlarged format. Press the < formats. Viewing a Single Image Viewing the Index This mode displays 9 images simultaneously on a single screen.

  • Page 99: Viewing Enlarged Images

    Viewing Enlarged Images Recorded images can be enlarged approximately 3×. Part to be enlarged JUMP Jumping to Another Image The display can jump directly to another image. Jump bar Image 10 Current Image 10 frames back image frames forward Viewing Recorded Images Select the image you want to enlarge from a single-image or index display.

  • Page 100: Info. Turning The Information Display On And Off

    Viewing Recorded Images INFO. Turning the Information Display On and Off When an image is displayed on the LCD monitor, you can press the <INFO.> button to view information about that image. Image information is available only for single-image displays. Image Information Displayed During PLAY The following information is displayed: Image (→40)

  • Page 101: Automated Playback Of Recorded Images (Auto Playback)

    Automated Playback of Recorded Images (Auto playback) This function automatically and continuously displays all images recorded on the CF card. Each image is displayed for approximately 3 seconds. ● During auto playback, the Auto power off function (→29, 120) does not operate. After you have finished viewing, be sure to press the <MENU>...

  • Page 102: Rotating An Image

    Viewing Recorded Images Rotating an Image The Rotate function can rotate an image 90° clockwise or counterclockwise. This allows you to play images with the correct orientation. Rotate pictures taken with the camera grip on the bottom 90° clockwise Rotate pictures taken with the camera grip on the top 90°...

  • Page 103: Protecting An Image

    Protecting an Image You can erase-protect images to prevent accidental erasure. You can press the < > button to switch between single-image and index display in order to protect individual pictures. The < > icon Once an image is protected, it cannot be removed by the camera’s Erase function. To erase a protected image, you must first remove the protection.

  • Page 104: Erasing Images (All Image Erase)

    Erasing Images (All Image Erase) You can erase images one image at a time, or you can erase all images on the CF card at once. This section describes how to erase all the images recorded on a CF card in one operation.

  • Page 105: Formatting The Cf Card

    Formatting the CF Card The CF card must be formatted before it is used in the EOS D60 camera. Also, if you see the message “ ” (CF card error) on the LCD panel when you load a CF card, the CF card may need to be formatted before it can be used.

  • Page 106: Print Order

    Check the instractions for the device you are using, or with the photo printing service. ∗ The print specifications while [ specifications. ∗ The Canon Card Photo Printer CP-10 cannot be connected to the EOS D60 to make direct prints. Just insert the CF card into the printer for easy printing.

  • Page 107: Selecting Images For Printing

    Selecting Images for Printing There are two ways to select images for printing. You can select images one at a time, or select all images. Selecting a Single Image From the menu, select [Print Order]. ● Press the < MENU> button. ●...
  • Page 108 Print Order Number of prints of the selected image Selecting All Images You can select all images on a CF card at once, except those in RAW format. ● Images are printed in order from oldest to newest. ● You can order up to 998 images. ●...

  • Page 109: Print Type

    Print Type You can specify the following print types. Standard: Prints one image to each sheet. Index: Prints an index of the images in reduced size, on one sheet. Both: Prints the individual images and an index sheet. Follow steps 1 and 2 of the Select- ing a Single Image procedure , to display the Print Order (→107)

  • Page 110: Specifying Date Printing

    Print Order Specifying Date Printing You can specify printing of the date and time on each image. ● If the print type is [Index], you cannot specify both date and file number. Specify one or the other. ● The date will be printed in the date style set from the menu in the Date/Time function.

  • Page 111: Specifying File Number Printing

    Specifying File Number Printing You can specify printing of file number information on each image. If the print type is [Index], you cannot specify both date and file number. Specify one or the other. Follow steps 1 and 2 of the Select- ing a Single Image procedure , to display the Print Order (→107)

  • Page 112: Connecting To A Tv

    Connecting to a TV You can connect the EOS D60 to a television (using the video cable provided with your camera) to display your recorded images. Always turn off the camera and the television before connecting or disconnecting them. Video input terminal If the camera is set to the wrong video system format (→121), you will not see a...

  • Page 113: Replacing The Date/Time Battery

    Replacing the Date/Time Battery When the date/time back-up battery level is low, “ the CR2025 lithium battery as follows. If you replace the backup battery while the camera is connected to a battery pack with power remaining or to a DC coupler, the date, time, and other menu functions will retain their settings. ( + ) (–) For the date/time battery, be sure to use a CR2025 lithium battery.

  • Page 114: File Numbering System

    File Numbering System The pictures you take are automatically assigned file numbers from 0001 to 9900 and stored in folders of 100 images each. Each folder on the CF card is numbered from 100 to 998. Automatic file numbering can be either by continuous numbering or auto reset numbering (the default setting is continuous numbering): (1) Continuous: Numbering is continuous between cards, so that...

  • Page 115: Cleaning The Cmos Imaging Element

    Because the imaging element is very sensitive, we strongly recommend that you have the cleaning done by Canon service representatives. When cleaning the imaging element, always connect the EOS D60 camera to a household power outlet using the DC coupler. If you try to clean the imaging element while the battery pack is installed in the camera, the cleaning warning message “...
  • Page 116 Cleaning the CMOS Imaging Element ● Never disconnect the camera power during cleaning. If the power is cut off, the shutter will close and possibly damage the shutter curtain. ● Use a blower without a brush attached. Using a brush to remove dust from the image element can damage the element.

  • Page 117: Menu Function Settings

    Menu Function Settings You can make a variety of settings from the EOS D60’s menu. The menu includes special settings called Custom Functions that are related to camera operation. This booklet indicates these settings with the mark, and provides basic descriptions.

  • Page 118: List Of Menu Functions

    List of Menu Functions Item Screen Quality Red-eye reduction function AEB to automatically change exposure level ISO speed LCD panel illumination Beep Description Sets the size in pixels of the image as recorded on the CF card, as well as the compression ratio.
  • Page 119 Item Screen Custom WB Parameters Protect Rotate Print Order Auto playback List of Menu Functions Description Selects the image to use as the basis for custom white balance adjustments. Besides the standard processing parameters applied automatically by the camera, up to three sets of processing parameters can be set and saved.
  • Page 120 List of Menu Functions Item Screen Auto power off Review Review time LCD Brightness Date/Time File numbering Description To conserve battery power, sets the Auto power off function that automatically switches off power if there is no operation for a given time.
  • Page 121 Sets Custom Functions that can adjust many of the camera functions to meet individual requirements. Resets all Custom Functions to the default settings. Displays the camera’s firmware version No. (For firmware updates, see Canon's Web site.) See page – – –...

  • Page 122: Custom Function Settings

    List of Menu Functions Custom Function Settings You can adjust many of the Canon EOS D60’s functions to meet your particular requirements using the Custom Function settings. To change Custom Functions, select [C.Fn] from the menu. Func. No. Item Unused...
  • Page 123 Effective for determining focus and exposure separately. In AI Servo AF mode, if an object passes between the camera and the subject, you can press the < > button to pause AF operation and keep the camera from focusing on the obstruction.
  • Page 124 List of Menu Functions Func. No. Item Shutter speed in Av mode with flash sequence / auto cancellaton Shutter curtain sync Lens AF stop button Fn. Switch Auto reduction of fill flash ∗ C.Fn-8-1: This works with the built-in flash and EOS-dedicated Speedlites. However, if the Speedlite has a second-curtain sync feature, set the Speedlite for second-curtain sync.
  • Page 125 Effective for using flash at night or in dark locations The first AEB shot will be taken at the standard exposure. The AEB setting will be saved even when you turn off the main switch, change lenses, or replace the battery or CF card. The AEB shots will be taken starting with the decreased exposure.
  • Page 126 List of Menu Functions Func. No. Item Menu button return position SET button func. when shooting Sensor cleaning Superim- posed display Shutter release w/o CF card ∗ Settings you set with C.Fn-11 will be effective even in the Basic Zone. Screen Select no.
  • Page 127 Enables prompt menu selection for items that are frequently changed. Enables prompt menu selection for items that are frequently changed. Convenient when you want to retain function settings, regardless of whether the power is On or Off. Lets you change quality quickly when you are shooting. Lets you change ISO speed quickly when you are shooting.

  • Page 128: Reference

    REFERENCE Basic Terminology Auto Exposure is a function that calculates the exposure automatically. The camera has a built-in exposure meter that automatically determines the correct exposure (the combination of shutter speed and aperture value). Auto Focus is a function that focuses the camera automatically. Aperture value The lens aperture opens and closes to control the amount of light that reaches the imaging element.
  • Page 129 Digital Print Order Format is a standard format for ordering prints of digital camera images from photo lab printing services, as well as printing from household printers. The Canon EOS D60 is DPOF-compatible. You can specify printing from the camera itself and store the order information on the CF card.

  • Page 130: Shutter Speed

    REFERENCE Firmware This is software containing various camera control instructions. The EOS D60 uses the firmware for image capture and image processing. Although the firmware is preinstalled in the camera, you can later install the latest version of the firmware when it becomes available on Canon’s Web site.

  • Page 131: Function Availability Table

    Function Availability Table Mode Dial ONE SHOT AI SERVO AI FOCUS Built-in flash White balance Mode Manual Red-eye Dial Auto Auto reduction AF Modes and Drive Modes Drive mode ONE SHOT AF An image cannot be taken unless focus is achieved. When focus is achieved, it is locked.

  • Page 132: Exposure Warnings

    REFERENCE Exposure Warnings Mode Blinking warning The warnings shown are examples using a lens with a minimum aperture value of f/3.5, and a maximum aperture value of f/22. Actual maximum and minimum aperture values will depend on the particular lens you use. Description Subject is too dark.

  • Page 133: Ae Lock Effects For Combinations Of Af Point Selection And Metering Method

    AE Lock Effects for Combinations of AF Point Selection and Metering Method AF point selection Metering method Evaluative metering Partial metering Center-weighted average Program Line < > The following program line applies when the camera is in Program AE < > mode. –1 –2 –3...

  • Page 134: Shutter Speed And Aperture Value Readouts

    REFERENCE Shutter Speed and Aperture Value Readouts Shutter speed readout The shutter speed is normally displayed in 1/2-stop increments. Numbers from denote the denominator of the shutter speed fraction: for example, addition, is 0.3 seconds, and Aperture value readout The aperture value is normally displayed in 1/2-stop increments. The larger the number, the smaller the aperture opening.

  • Page 135: Message List

    Jot down the “xx” error code and take your camera to the nearest Canon Service Center (→back cover). If an error occurs after you take a picture, the camera might have missed the shot. Press the playback button to see if the image appears on the LCD monitor.

  • Page 136: Troubleshooting

    Camera is not operating properly. ➡ Press the shutter button down halfway to reset the camera to normal. (→29) ∗ If the < a Canon Service Center. (→back cover) > icon still appears, the camera needs repair. Take it to...
  • Page 137 Clean the monitor with a soft eyeglass cloth. images are hard to LCD monitor is worn out. ➡ Consult the store where you bought your camera, or a Canon Service Center. (→10, back cover) Images are blurred Lens focusing mode switch set to <MF> (or < M>).

  • Page 138: Major Accessories (Optional)

    REFERENCE Major Accessories (Optional) Battery Pack BP-511 This is a powerful lithium ion rechargeable battery pack. The rated voltage is 7.4V. You can use the Compact Power Adapter CA-PS400 to charge the BP-511 battery pack, and when fully charged it has enough power for you to take approximately 490 images (Normal, with 50% flash use).

  • Page 139: Pc Card Adapter

    59 minutes, 59 seconds, in 1-second increments. Also includes shutter release lock and a one-touch locking plug for connecting to the EOS D60’s remote control terminal. Remote Switch RS-80N3 This is a remote switch with an 80-cm cord to prevent camera shake for super-telephoto shots, macroshooting, and bulb exposures.

  • Page 140: System Map

    REFERENCE System Map Eyecup Eb ST-E2 Rubber Frame Eb Items included E-series Dioptric Adjustment Lenses with the Camera Eyepiece Extender EP-EX15 Strap Angle Finder C DC Coupler DR-400 Compact Power Adapter CA-PS400 Battery Pack BP-511 Battery Pack Battery Grip BG-ED3 BP-511 220EX 420EX...
  • Page 141 CF Cards CF Card Reader • EOS Digital Solution Disk • Adobe Photoshop LE Disk Interface Cable IFC-200 PCU Video Cable VC-100 PC Card Adapter PC Card Slot USB Port PC Card Slot Parallel Port USB Port PC/AT Compatible REFERENCE Macintosh Computer Computer...

  • Page 142: Major Specifications

    Type ... Digital AF/AE SLR camera with built-in flash Recording medium ... Type I and II CF card Image size ... 22.7 mm × 15.1 mm Compatible lenses ... Canon EF lenses Lens mount ... Canon EF mount • Imaging Element Type ...

  • Page 143: Exposure Control

    Viewfinder information ... AF information: AF points, focus confirmation light Depth-of-field preview ... Enabled with depth-of-field preview button • Autofocus Type ... TTL-CT-SIR with a Multi-BASIS AF points ... 3 (| + |) AF working range ... EV 0.5-18 (at 20˚C, ISO 100) Focusing modes ...

  • Page 144: Drive System

    REFERENCE Self-timer ... 10-sec. delay. Remote control ... Compatible with Remote Switch RS-80N3 • Built-in Flash Type ... Auto pop-up E-TTL autoflash (retractable) Guide No..12 (ISO 100, meters)/ 39 (ISO 100, ft.) Recycling time ... Approx. 3 sec. Flash-ready indicator ...

  • Page 145: Power Source

    Dimensions ... 38.4 (W) × 21 (H) × 55.3 (D) mm (1.51 × 0.83 × 2.18 in) Weight ... 110 g (3.9 oz) (excluding power cord) • All the specifications above are based on Canon's testing standards. • The camera's specifications and external appearance are subject to change without notice.

  • Page 146: Index

    Index Accessories ... 138 A-DEP ... 76 AE ... 128 AEB (Autoexposure bracketing) ... 78 AE lock ... 80, 133 AF ... 27,128 AF Assist-beam ... 39 AF Mode ... 54 AF point ... 57 AI Focus AF ... 56 AI Servo AF for moving subjects ...
  • Page 147 Modeling flash ... 95 Sync shutter speed ... 87, 96 System Map ... 140 Night Portrait Mode ... 48 Non-Canon flash unit ... 96 Timer operation ... 20 NTSC ... 112, 121 Timer Remote Controller ... 139 Tv ... 70 One-shot AF ...
  • Page 148 CANON SALES CO., INC. 12-15 Mita, 3-Chome, Minato-ku, Tokyo 108-8011, Japan This Instructions booklet is current as of January 2002. For information on using the camera with system accessories introduced after this date, contact your nearest Canon Service Center. CT1-1232-001 ©...

Table of Contents