Canon EOS D60 Service Manual page 30

Part 1: General Information
13. External Speedlite
13-1 Flash sync contacts: (1) Hot shoe: X-sync contacts
13-2 Flash auto:
1) Type: Illumination by lamp (lamp also used for AF-
assist light)
2) Shooting modes: Operates in all modes except
Landscape and Sports.
3) Operation setting: On-screen menu
4) Conditions for illumination: Lights after focus is
achieved when the shutter button is pressed halfway
(SW-1) in the One-Shot AF or MF mode. (In the AI
SERVO AF mode, shutter-release priority takes effect
and red-eye reduction lamp lights immediately at
SW-1.)
5) Illumination duration: Under the conditions of 4,
lamp lights during SW-1 (with the self-timer, it lights
2 sec. before shutter release). Light level decreases
after 1.5 sec.
6) Lamp ON indicator: Exposure level display in
viewfinder (dot display sequence for the first 1.5 sec.)
7) Shutter-release lock: None (Shutter-release priority)
* The control condition above also apply when an
external Speedlite is used.
* Locking pin hole provided to prevent Speedlite
slippage.
(2) Lower side terminal: PC terminal (JIS B-type socket)
* Screw lock and shock protection feature provided on
the hot shoe.
Enabled with the camera's Program AE mode.
(1) With EX-series Speedlites: E-TTL autoflash
1) Normal flash
When the flash is ready, the flash sync speed (1/60
sec. - 1/200 sec.) is set automatically. The camera's
E-TTL program automatically sets the flash aperture.
When the shutter button is pressed fully (SW-2), a
fixed-output preflash is fired right before the mirror
goes up. The AE sensor takes an available light
reading (before the preflash is fired) and a reflected-
light reading when the preflash is fired. The suitable
output of the main flash is then calculated, and the
main flash is fired. If an EX-series Speedlite is set for
high-speed sync (FP flash) and the light level exceeds
the lens' minimum aperture, high-speed sync takes
effect automatically. When highspeed sync is set, the
icon lights in the viewfinder. Daylight sync (fill
flash) can also be controlled automatically.
2) FE lock
When an EX-series Speedlite is used and the flash is
1-20