Resetting The File Number - Canon PowerShot A520 Quick Start Manual

Various Functions
I
11n the [W(Set up)]
menu, select
IE
(File No. Reset).
• See Selecting Menus and
Settings (p. 66).
The file number of the last image to be shot is
Off
memorized so that images recorded to a new
memory card start from the next number.
The
fil~
number is reset to the start (100-0001)
On each time a new memory card is inserted. New
~mages
recorde.d on memory cards with existing
Images are assigned the next available number.
2
Select [On] or [Off] using the • or
.. button.
3
Press the MENU button.
The images you shoot are automatically
assigned file numbers. You can select how
the file number is assigned.
Resetting the File Number
""PI~1!lj!i!!?!l1ii!!i",ifi'/lW,$~~!!I!'FI"/"I!W!!!!I!'i'IIIFt"!'!""
,"i", .•
",'/"I'';''I''!ij'''';''Wilt':,,:,,'
• No image will appear on the LCD monitor
when the camera is connected to a TV
monitor.
• The video output signal can be switched
(NTSC or PAL) to accommodate different
regional standards (p. 73). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan,
etc.
- PAL: Europe, Asia (excluding Taiwan),
Oceania, etc.
If the video system is set incorrectly, the
camera output may not display properly.
• If the TV is a stereo model, you can plug the
audio plug into either the left or right Audio
In jack. Please refer to the TV's manual for
details.
• A TV set cannot be used in ~ mode.
115