Part 4: Electrical Adjustments
3) PClick the button in the figure on
the right. Image enlargement
/reduction and the currently
displayed gain can be changed.
Set the image so that defects can
be distinguished. To do this, set
gain to about 1.0.
4) Click the "Update" button.
5) When you click the "Update"
button, choice of the files will
displayed. Then choose
"xxxxxx_1def." "xxxxxx" is the
CMOS imager file number.
6) Click the defects desired to add.
The coordinates will be added to
the Defect List. If wrong position
is set, choose it and click
"DELETE." Click "SAVE" to add
the coordinates to the file.
7) For the "OUTPUT FILE,"
AjDef00.imag, AjDef01.img,
AjDef02.img, AjDef04.img,
AjDef05.img, AjDef06.img,
AjObSkip.img will be created.
4-14