<Adjustment Method>
If reference data is already made, the adjustment itself is completed by "Setting"
-> "Start adjustment". Note, however, that to respond to user preferences (e.g.
stronger red, blue is too predominant), reference data must be changed, re-
adjusted, and checked.
Before changing the reference data, be sure to record the original
values. Once reference data is changed, the original values are
overwritten.
"Color" drawn in the graph changes according to the overall
exposure level. For this reason, offset exposure during
CAUTION
measurement so that the "Y" level of white on the color bar
becomes 225±10 counts. (This is the same as color matrix basic
data and reference data made by "1.3 Description of Camera's
Electrical Adjustments".)
Part 4: Electrical Adjustments
-
+
4-21
-
+
-
+
-
+
+
-