FLIR T420-NIST User Manual page 26

9 – Camera parts
16
netzerotools.com
7 Mode button: Push to display the mode selector and select a camera mode.
The modes that can be selected are:
Thermal camera: Using this mode, the camera captures infrared images.
■
Digital camera: Using this mode, the camera captures visual images.
■
Thermal fusion: Using this mode, the camera captures an image where
■
some parts are displayed as an infrared image and some parts as a vi-
sual image, depending on the temperature.
Picture-in-Picture: Using this mode, the camera captures an image
■
where the middle part is displayed as an infrared image and the outer
frame as a visual image.
MSX (Multi Spectral Dynamic Imaging): Using this mode, the camera
■
captures infrared images where the edges of the objects are enhanced.
8 A/M button: This button has two main functions:
1 Push to switch between automatic and manual adjustment modes. The
manual adjustment modes that can be selected are the following:
Manual: Using this mode, the top and bottom temperature levels in
■
the scale can be changed simultaneously, by pushing the joystick
up/down. The temperature span can be changed by pushing the joy-
stick left/right.
Manual min: Using this mode, the bottom temperature level in the
■
scale can be changed by pushing the joystick up/down, while the top
temperature level remains fixed.
Manual max: Using this mode, the top temperature level in the scale
■
can be changed by pushing the joystick up/down, while the bottom
temperature level remains fixed.
2 Push and hold the button until you hear a clicking sound to autoadjust
the image.
9 Archive button: Push to open/close the image gallery.
10 On/Off button: Push to turn on/turn off the camera. Allow 45 seconds for
the startup sequence.
11 Hand strap.
netzerotools.com
Publ. No. T559772 Rev. a593 – ENGLISH (EN) – March 16, 2012