Yamaha XV19SX(C) Service Manual page 125

5. Remove:
• Engine oil drain bolts (crankcase) "1"
(along with the gaskets)
1
6. Drain:
• Engine oil
(completely from the oil tank and crankcase)
7. If the oil filter cartridge is also to be replaced,
perform the following procedure.
M MMM M MMM M M MMM M M MMM M
a. Remove the oil filter cartridge "1" with an oil
filter wrench "2".
Oil filter wrench
90890-01426
YU-38411
b. Lubricate the O-ring "3" of the new oil filter
cartridge with a thin coat of engine oil.
ECA13390
CAUTION:
Make sure the O-ring "3" is positioned cor-
rectly in the groove of the oil filter cartridge.
1
1
M MMM M M MMM M MMM
3-12
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
Oil filter cartridge
17 Nm (1.7 m·kg, 12 ft·lb)
L LLL L LLL L L LLL L L LLL L
8. Check:
• Engine oil drain bolt gaskets
Damage → Replace.
9. Install:
• Engine oil drain bolt (oil tank)
(along with the gasket)
Engine oil drain bolt (oil tank)
43 Nm (4.3 m·kg, 31 ft·lb)
10.Install:
• Engine oil drain bolts (crankcase)
(along with the gaskets)
Engine oil drain bolt (crankcase)
43 Nm (4.3 m·kg, 31 ft·lb)
11.Fill:
• Oil tank
(with the specified amount of the recom-
mended engine oil)
Engine oil quantity
Total amount
5.20 L (5.50 US qt) (4.58 Imp.qt)
Without oil filter cartridge re-
placement
4.10 L (4.33 US qt) (3.61 Imp.qt)
With oil filter cartridge replace-
ment
4.90 L (5.18 US qt) (4.31 Imp.qt)
NOTE:
Pour the engine oil in two stages. First, pour in
2.5 L of oil, then start the engine and rev it 3 to 5
times. Stop the engine, and then pour in the re-
mainder of the specified amount.
ENGINE
L LLL L L LLL L LLL