Programming - ABB Controlpanel Operating Instructions Manual

6136/100c-102-500 cpc/u 3.1
Table of Contents

Advertisement

Available languages

Available languages

9.2

Programming

Call up "Commissioning" in the "System"
menu.
● See chapter "System settings".
● You may now program the unit using an
SD-/MMC card or via the bus.
Programming via the bus may take several hours, depending on the configuration. Use bus
progamming only for minor project changes!
We recommend programming with an SD/MMC card!
Programm-
1. Create the new project with the
ing with
commissioning software on a PC and save
SD/MMC
the project on an SD/MMC card.
card
2. Insert the SD card into the room/control
panel and press the "Read Multimedia/SD
card" button (Fig. 68).
ENG
Fig. 66
Fig. 67
43

Advertisement

Chapters

Table of Contents
loading

Table of Contents