Eyebolt Rigging For Upj-1Xp And Upjunior-Xp - Meyer Sound ULTRA XP Operating Instructions Manual

With the appropriate pole and pole-mount hardware, the
UPJ-1XP, UPJunior-XP, UPM-1XP, and UPM-2XP can be
mounted above the UMS-1XP subwoofer.
Figure 3: UMS-1XP with MPS-UMS Pole and UPJunior-XP
EYEBOLT RIGGING FOR UPJ-1XP AND
UPJUNIOR-XP
The UPJ-1XP and UPJunior-XP ship with two M8 threaded,
20 mm eyebolts. The eyebolts attach to the top or bottom
end plates and can be used to suspend the loudspeaker.
Ultra XP Top Plate with Threaded Holes for Eyebolts
A single loudspeaker can be suspended with one eyebolt.
However, two eyebolts provide more safety and stability, as
well the capability of aiming and tilting the loudspeaker for
targeted coverage.
Ultra XP with One Eyebolt (Left) and Two Eyebolts (Right)
NOTE: Up to two UPJ-1XPs UPJunior-XPs,
oriented vertically, can be suspended with the
eyebolts supplied by Meyer Sound at a 7:1 safety
factor. For this configuration, the top loudspeaker
would have two eyebolts installed on its top plate and
two eyebolts installed on its bottom plate, for con-
necting to the second loudspeaker. Additional M8
eyebolts are available from Meyer Sound.
ULTRA XP OPERATING INSTRUCTIONS
21