Mounting Yokes - Meyer Sound ULTRA XP Operating Instructions Manual

MOUNTING YOKES

The following mounting yokes are available for the UPJ-1XP, UPJunior-XP, UPM-1XP, and UPM-2XP loudspeakers. The
yokes suspend a single loudspeaker and allow a wide range of horizontal and vertical adjustment. The yokes for the
UPJ-1XP and UPJunior-XP attach to the bottom end plate. The yokes for the UPM-1XP and UPM-2XP attach to the top and
bottom nut plates and include both 3/8"-16 and M10 hardware. A "C" or "G" hanging clamp and steel safety cable (not
included) are required to suspend the loudspeakers with yokes.
Ultra XP Mounting Yokes
Model
MYA-UPJ
(PN 40.134.035.01)
MYA-UPJunior
(PN 40.173.044.01)
MYA-UPM
(PN 40.084.038.01)
Figure 2: MYA-UPJ Mounting Yoke (Left), MYA-UPJunior Mounting Yoke (Center), MYA-UPM Mounting Yoke (Right)
Supported Maximum Num-
Loudspeakers ber of Cabinets
UPJ-1P 1
UPJ-1XP
UPJunior 1
UPJunior-XP
UPM-1P, 1
UPM-2P,
UPM-1XP,
UPM-2XP
Loudspeaker Mounting Options/Notes
Attachment
Bottom Requires "C" or "G" hanging clamp and
■
steel safety cable
Accommodates hanging clamps with
■
standard 1/2" (12 mm) bolts
Bottom Requires "C" or "G" hanging clamp and
■
steel safety cable
Accommodates hanging clamps with
■
standard 1/2" (12 mm) bolts
Top/Bottom Requires "C" or "G" hanging clamp and
■
steel safety cable
Accommodates hanging clamps with
■
standard 1/2" (12 mm) bolts
Includes both 3/8"-16 and M10 hard-
■
ware
Secure the yoke by tightening the bot-
■
tom bolt first and then the top
Do not overtorque the bolts as this may
■
damage the cabinet
ULTRA XP OPERATING INSTRUCTIONS
19