Opening And Closing The Door; Starting The Programme - Miele PG 8527 Operating Instructions Manual

Opening and closing the door

^ Press button a.
The door will go up or down.
To open the door on the Clean side
(PG 8528), the following conditions
must also be met:
– Programmes with defined process
requirements must have been
carried out without any faults
according to programme
parameters.
or
– the door interlock is activated, i.e.
the automatic door function is set to
one of the following parameters:
- Interlock,
- Door clean + Interlock,
- Door unclean + Interlock.
(see Programming manual "Machine
functions / Automatic door").
,
If the boiler has been
programmed to "Boiler ready", be
particularly careful to avoid hot
water and steam when opening the
door. Danger of burning or scalding.
The inlet to the wash cabinet is
located, as viewed from the unclean
side, underneath the basket runner
on the right hand side.

Starting the programme

See the Programme charts in the
Programming manual supplied with
the machine for detailed information
and important notes on the standard
Miele programmes.
,
When reprocessing medical
devices, any changes made to
programmes or dispensing systems
must be documented in a log book
kept with the machine (in
accordance with the Medical Device
Directive).
The machine's cleaning and
disinfecting standards must also be
re-validated.
If a barcode scanner is connected to
the washer-disinfector and the
operator or loading scan is activated,
the programme selected can only be
started once the scanning process
has been carried out.
All steps required for operating the
barcode scanner are described in
the section "Barcode scanner".
Operation
47