Automatic Mobile Unit Recognition - Miele PG 8527 Operating Instructions Manual

The automatic mobile unit recognition
system allocates a programme to a
mobile unit. The mobile units must be
coded with a magnetic strip (via a Bit
combination).
The programme allocated for a coded
mobile unit is available in operating
level C.
After a coded mobile unit has been put
into the machine and the door closed,
the automatic mobile unit recognition
system will select the allocated
programme.
The coding of the mobile units and
the allocation of programmes in the
Profitronic control unit are described
in the Programming manual for the
washer-disinfector.

Automatic mobile unit recognition

,
small metallic objects or instrument
parts attracted to the magnetic strip,
in particular to the underside of it.
Any metallic objects on the strip can
result in the coding being incorrectly
read.
Make sure that you code mobile
units with side coupling with a track
where the sixth magnet is set to 1.
Mobile units without side coupling
must be coded with a track without
the sixth magnet.
The magnet strips for PG 8527 / PG
8528 washer-disinfectors must have
black magnets.
Make sure that there are no
27