Advertisement
Quick Links
Fenix HL30 is a high-intensity headlamp equipped with two light sources. Featuring four distinct
brightness levels, HL30 is effective in a wide range of challenging lighting situations. It employs a
dual switch for quick output changes that include red light and SOS modes.
Powered by two readily available AA batteries, it can deliver a max 200 lumen output with a runtime
of up to 140hours and a max 40m throwing distance. Featuring waterproofing to IPX-6 Standard and
the portable integrated design, Fenix HL30 must be able to ensure you a joyful and relaxing outdoor
experience in various conditions.
Technical Parameters
ANSI/FSC
Turbo
LUMENS
OUTPUT
1h 40min
RUNTIME
DISTANCE
INTENSITY
IMPACT
RESISTANT
IPX-6(using a shower nozzle with a diameter of 12.5mm to spray water to the product for 3
WATERPROOF
EXTRA
FUNCTION
headlamp strap, top headlamp strap, the mount of the top headlamp strap and spare o-ring
ACCESSORIES
Fenix™
General Mode
High
200
100
LUMENS
LUMENS
4h 30min
10h30min
minutes at a distance of 2.5~3m from the spray head (the flux is 100 1±5% L/min)
HL30
Mid
Low
45
4
LUMENS
140h
40m
475cd
1m
Red light
SOS
Mode
—
LUMENS
—
45
—
Advertisement
Related Manuals for Fenix HL30
Summary of Contents for Fenix HL30
- Page 1 Powered by two readily available AA batteries, it can deliver a max 200 lumen output with a runtime of up to 140hours and a max 40m throwing distance. Featuring waterproofing to IPX-6 Standard and the portable integrated design, Fenix HL30 must be able to ensure you a joyful and relaxing outdoor experience in various conditions.
- Page 2 Press and hold the mode switch button for about one second to activate the red light mode. Press and hold the mode switch button for about 3 seconds to activate the SOS mode. While in red light or SOS mode, a single press on the mode switch button returns the HL30 to general mode.
-
Page 3: Battery Specifications
Hold back the protrusions on the back cover with your fingers (as “open” indicates), and then pull the back cover open. Insert the nominal batteries with the cathode side ( ) toward the spring. Put the two snap joints towards each other, and then securely replace the cover before testing the HL30’s power and functions. -
Page 4: Usage And Maintenance
Assemble Headlamp Strap Top headlamp strap with pattern Headlamp strap without The mount of the Headlamp strap with pattern top headlamp strap pattern Usage and Maintenance Please do not disassemble the sealed head, doing so can cause damage to the light and will void the warranty. -
Page 5: Product Warranty
You can get an extra six-month warranty period once you have successfully registered. What's more, you could take part in the lottery of questionnaire at the same time. Warning HL30 is a high-intensity lighting device and capable of causing eye damage, avoid shining the light directly into the eyes.