Page 1
30min 15min Runtime 480m 294m 161m Distance 57,600c 21,600cd 6,480cd 2,360cd 380cd Intensity Impact Resistance IP68, underwater 2m Waterproof Notice: The abovementioned parameters (lab-tested by using two Fenix ARB-L18-3500 18650 rechargeable Li-ion batteries) may vary between flashlights, batteries and environments.
Page 2
Cree XHP35 HI neutral white LED, with lifespan of 50,000 hours Powered by two 18650 rechargeable Li-ion batteries 159.5mm Length x 48mm Head diameter x 43mm Body diameter 271 grams/9.6oz (excluding batteries) Max 1300 Lumens and 480m beam distance ...
Page 3
In Flash mode, press and hold the Functional switch for 1 second to the last used output in General mode. Output Selection General mode, single click Functional switch cycle through Eco→Low→Med→High→Turbo. In Flash mode, single click the Functional switch to cycle through Strobe→SOS. Instant Strobe With the light switched off, press the Functional switch to enter instant Strobe, release it the light will return to off status.
After loading the batteries into the holder, insert the holder with its convex top towards the light tail. Screw the head back on. Usage and Maintenance Disassembling the sealed head can cause damage to the light and will void the warranty. ◎ Fenix recommends using excellent quality battery. ◎...
Page 5
If the flashlight will not be used for an extended period, remove the battery, or the flashlight ◎ could be damaged by electrolyte leakage or battery explosion. Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with ◎...