Fenix WT16R Operating Instructions, Technical Parameters

Technical Parameters
ANSI/ PLATO
FL1
High
300 lumens
Output
3 hours
50 minutes*
Runtime
115 meters
Distance
3200
candela
Intensity
Impact
Resistance
Water
Resistant
Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results
produced by Fenix through its laboratory testing using the built‐in 2000mAh Li‐polymer
rechargeable battery pack, under the temperature of 21±3°C and humidity of 50% ‐ 80%. The
true performance of this product may vary according to different working environments.
* The High output levels are measured in total of runtime including output at reduced levels due
to temperature or protection mechanism in the design.
Product Features

300 lumens maximum output; 115 meters maximum beam distance.

2 x CREE XP‐E2 Led's and COB floodlight source with a lifespan of 50,000 hours.

Built‐in 3.6V/2000mAh Li‐polymer battery pack.

Combines spotlight, floodlight and yellow flash in one.

Super magnets are placed in the back and tail of the light for metal connection.

Widened stainless steel body clip for firm connection to pack and pocket.

Battery level indication for instant checking of remaining battery level.
Fenix WT16R Flashlight
Spotlight Mode
Med Low
100 lumens 30 lumens
9 hours
30 hours
20 minutes
65 meters 35 meters
1070 320
candela candela
Floodlight Mode
High
300 lumens 100 lumens
3 hours 9 hours
50 minutes* 20 minutes
23 meters 14 meters
130
candela
candela
1meter
IP66
Low Yellow Flash
10 lumens
/
/
50
/