Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Intimidator™ Wave 360 IRC User Manual Rev. 1
Before mounting the product, read and follow the safety recommendations indicated in
the
Safety
Notes.
For
www.chauvetlighting.com/cables-clamps-main.html/.
The Intimidator™ Wave 360 IRC may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable (such as CH-05
from Chauvet). Mount the product securely to a rigging point, such as an elevated
platform or a truss.
·
When rigging the product onto a truss, you should use mounting clamps (such as
CLP-15 from Chauvet) of appropriate weight capacity. The bracket has 13-mm
holes, which are appropriate for this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The mounting bracket also allows for surface mounting. When mounting the product
on the floor, make sure that the product and cables are away from people and
vehicles.
Safety
Cable
When using only one mounting clamp with this fixture, you must use a clamp with a
captive bolt to prevent accidental loosening.
our
CHAUVET®
line
of
Technical
Attachment
mounting
clamps,
go
Specifications).
Bracket
Plate x2
Rubber Feet
(x4) for floor
mounting
Page 9 of 34
to
Advertisement
Table of Contents
