Copying Different Sized Originals Onto One Size Of Copy Paper [Filing Mode] - Kyocera Mita KM-C830 Operation Manual

Section 6 FUNCTIONS
18. Copying different sized originals onto one size of copy paper
[Filing mode]
With this mode, when you are copying from different sized originals,
you need only separate the originals by size group and then scan
them all in order to have all of the originals copied onto the same
paper size.
NOTES
• If you do not have a Memory Copy Board installed as standard
equipment, the optional Memory Copy Board must be installed in
your copier in order to use this mode.
• If your machine is a duplex copier, it is possible for you to make
duplex (2-sided) copies in this mode.
• Originals can be scanned from both the DF and the platen in
combination.
1 Press the Auto Selection/Filing key to light the corresponding
indicator.
The "Select function" screen will appear.
Inch specifications
6-41
Metric specifications
2 Use the M cursor or the N cursor key to select "x Filing".
Inch specifications
Metric specifications
3
Press the Enter key.
Use the M cursor or the N cursor key to specify the type of
4
originals being copied.
Select "z 1-sided" if you are using 1-sided originals and
"x 2-sided" if you are using 2-sided originals.
Inch specifications
Metric specifications
5 Press the Enter key.
• If your machine is a duplex copier, go to the next step.
• If your machine is a standard copier, go directly to step 8.
Use the M cursor or the N cursor key to select the type of
6
finished copies you want to make.
Select "z 1-sided" if you want to make 1-sided copies and
"x 2-sided" if you want to make 2-sided copies.
Inch specifications
Metric specifications