G Checking The Copy Counts - Kyocera Mita KM-C830 Operation Manual

Section 7 COPIER MANAGEMENT
Use the M cursor key to select "z End" and then press the
6
Enter key.
The message display will return to the screen in step 2.
Inch specifications
Metric specifications
7 Use the M cursor key to select "z End" and then press the
Enter key. The message display will return to the "Ready to
copy." screen.
Inch specifications
Metric specifications

G Checking the copy counts

1 Display the "Copy Management" screen. (See page 7-3.)
Use the M cursor or the N cursor key to select
2
"c Reference".
Inch specifications
Metric specifications
7-9
3 Press the Enter key.
The total number of copies made under all department codes
as a whole will be displayed.
Inch specifications
Metric specifications
4
Press the Enter key.
The message display will return to the screen in step 2.
5 Use the M cursor key to select "z End" and then press the
Enter key. The message display will return to the "Ready to
copy." screen.
Inch specifications
Metric specifications