Adjusting The Color Balance - Kyocera Mita KM-C830 Operation Manual

4. Adjusting the color balance

The color balance can be fine-adjusted by increasing or decreasing
the intensity of each of the colors: cyan, magenta, yellow or black.
NOTES
• These adjustments are only available with full color copying.
• These adjustments are NOT available in the auto exposure mode.
• These adjustments are NOT available in combination with one-touch
image quality adjustment.
• For a sample of copies made with an adjusted color balance, see
"Color balance adjustment samples" on page ii.
1
Press the Color Edit key to light the corresponding indicator.
Inch specifications
2 Use the M cursor or the N cursor key to select "v Color
Balance" ["v COLOUR BALANCE"] and then press the
Enter key.
Inch specifications
Metric specifications
3 Use the M cursor or the N cursor key to select the color to
be adjusted (cyan, magenta, yellow or black).
Inch specifications
Metric specifications
Metric specifications
Section 5 COLOR COPY SETTINGS
4 Press the Enter key. The "Adjust Color Balance" ["ADJUST
COLOUR BALANCE"] screen will appear.
Inch specifications
Metric specifications
Use the O cursor or the P cursor key to adjust the value for
5
that color as desired.
NOTE
Adjustment is possible in 11-step increments between -5 and +5.
6 Press the Enter key.
Inch specifications
7 If you want to adjust the intensity of another color, repeat
steps 3 through 6.
8 Once you are finished adjusting the color balance, use the M
cursor key to select "z End" and then press the Enter key.
9 Use the M cursor key to select "z End" and then press the
Enter key. The message display will return to the "Ready to
copy." screen.
Metric specifications
5-4