Xy Zoom Mode - Kyocera Mita KM-C830 Operation Manual

Section 6 FUNCTIONS
4 Press the Enter key. The message display will return to the
"Ready to copy." screen and the selected ratio will be shown
in the display.
Inch specifications
NOTE
The magnification ratio can be entered directly using the numeric keys
on the keypad, or it can be changed in 1% increments using the
Zoom(+) and/or Zoom(-) keys.
5
Press the Start key to begin the copying procedure.
Inch specifications
6-3
Metric specifications
Metric specifications

(4) XY zoom mode

With this mode, it is possible for you to change the length and width of
the copy image separately. The magnification ratio can be set to any
1% increment between 25% and 400%.
1 Set the original to be copied.
2 Press the Digital Editing key to light the corresponding
indicator.
Inch specifications
3 Use the M cursor or the N cursor key to select
"n XY Zoom" and then press the Enter key.
Inch specifications
Metric specifications
Metric specifications