G Separation Insert Mode - Kyocera Mita KM-C830 Operation Manual

Section 6 FUNCTIONS

G Separation insert mode

With this mode, sheets can be inserted at specified points among
copies of multiple originals. You can also select whether to copy onto
the inserted sheets themselves or not.
NOTES
• The drawer which contains the paper that to be fed as insert sheets
must be designated in advance. (See "* Insert tray" on
page 7-21.)
• If "Bypass" is selected under "* Insert tray" on page 7-21, it will not
be possible to make 2-sided copies of the separation inserts.
• The available settings for this mode will differ depending upon the
type of originals being copied and the type of finished copies that
are being made.
A circle (" ") in the following table indicates that the setting is
possible.
Types of copy Copy onto
settings front and
available back
Original/
Copy type
1-sided 1-sided
originals copies
2-sided
copies
2-sided 1-sided
originals copies
2-sided
copies
6-27
Copy on Leave both
front only front and
back blank
1 If you choose to copy on the front and back side of the insert
sheets...
* The illustration shows the result when 2-sided copies are made.
2 If you choose to copy on the front side of the insert sheets only...
* The illustration shows the result when 2-sided copies are made.
3 If you choose to leave both the front and back side of the insert
sheets blank...
* The illustration shows the result when 2-sided copies are made.