G Changing Copy Limits - Kyocera Mita KM-C830 Operation Manual

NOTE
If you want to delete another department code, repeat steps 6 through
8.
9 Press the Stop/Clear key.
The message display will return to the screen in step 4.
10 Use the M cursor key to select "z End" and then press the
Enter key.
The message display will return to the screen in step 2.
Inch specifications
Metric specifications
11 Use the M cursor key to select "z End" once again and then
press the Enter key.
The message display will return to the "Ready to copy."
screen.
Inch specifications
Metric specifications
Section 7 COPIER MANAGEMENT

G Changing copy limits

1 Display the "Copy Management" screen. (See page 7-3.)
Use the M cursor or the N cursor key to select
2
"x Management Setting" ["x COPY MGMT SETTING"].
Inch specifications
Metric specifications
3 Press the Enter key.
4 Use the M cursor or the N cursor key to select "v Copy
Limit Correction".
Inch specifications
Metric specifications
5 Press the Enter key.
6 Use the numeric keys on the keypad to enter the department
code that you want to change to copy limit for.
Inch specifications
Metric specifications
7-6