Running Adminmanager; Setting The Ip Address - Kyocera KM-2030 Instruction Handbook Manual

Scan system(a)

Hide thumbs Also See for KM-2030:

Table of Contents

3-5 Configuration Tool

(2) Running AdminManager

Click on Start in the Windows Task Bar and select Program -> IB-2x Tools -> AdminManager from the

resulting pop-up menus.

The following procedure explains how to use AdminManager to set the IP address in the Scanner Interface

Card. Perform this procedure when you want to set a static IP address.

1. Run AdminManager.

2. Under Setup in the Menu Bar, select Set Initial IP Address. The IP Address Setup window will open.

Page 3-67

Table of Contents