Toner Container Replacement; Toner Container Replacement Interval - Kyocera Ecosys FS-3820N Operation Manual

Mita america, inc. operation guide page printers fs-3820n, fs-3830n
Hide thumbs Also See for Ecosys FS-3820N:
Table of Contents

Advertisement

Toner Container Replacement

Toner Container Replacement

Toner Container Replacement Interval

The toner container in the printer should be replaced as soon as the
message display shows Toner low or soon after. If you continue to use the
printer, eventually the toner supply will be exhausted at which point the
printer will stop printing and the Replace toner Clean printer
message will be shown instructing you to install a new toner kit.
Assuming an average toner coverage of 5% and Ecoprint mode turned off,
the toner container will need replacing approximately once every 20,000
pages.
For a new printer with a toner kit installed for the first time, the
number of copies that can be printed will be approximately 10,000.
Toner Kits to be Used
Contents:
Be sure to distance items such as floppy disks during toner container
replacement.
Note
Be sure to clean the inside of the printer when replacing the toner
container. For details, see
Use of original Kyocera Mita toner kits is highly recommended to
prevent printer trouble and ensure the long life of the printer.
Toner container
Waste toner box
Wiper cloth
Grid cleaner
2 plastic bags (for disposal of the old toner container and
waste toner box)
Installation Guide
Cleaning
3-2
on page 3-9.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-3830nFs 3830n - b/w laser printerEcosys fs-3830n

Table of Contents