Day/Night Settings; Privacy Setting; 3D-Dnr Setting - LG LW9422 series Owner's Manual

Day/Night settings

1. Select [DAY/NIGHT] option.
2. Use or button to select a mode for DAY/NIGHT function.
• AUTO: DAY/NIGHT mode changes automatically.
Note:
If you set the AGC to [OFF] on the [EXPOSURE] menu, the
AUTO mode of the DAY/NIGHT function is not available and
[---] mark is displayed.
> LEVEL: Use or
> DWELL TIME: Use
• DAY: Color mode enabled.
• NIGHT: Black-and-white mode enabled.

Privacy setting

This function is aiming at the protection of personal privacy. The
selected part is not displayed on the screen.
1. Select the [PRIVACY] option.
2. Use or button to select [ON] and press
SETUP menu appears.
3. Use or button to select a zone number (AREA1 to AREA8)
on the [MASK NUMBER] option.
4. Use or button to set to ON or OFF on the [MASK STATE]
option. If you set to ON, the mask zone box appears on the live
window.
5. Use or button to select the color of the mask zone box on
the [MASK COLOR] option.
6. Use or button to select an option then use
to adjust the option.
• WIDTH: Increase or decrease the horizontal size of the mask
zone box.
• HEIGHT: Increase or decrease the vertical size of the mask
zone box.
7. Use or button to set to ON or OFF on the [GRID] option.
Note:
The parts with the registered mask numbers from AREA1 to AREA4
have the same color. (So do the parts with the numbers from AREA5
to AREA8.) If you change the mask color, the registered mask color
will be changed automatically with the same color for each of group
(AREA1 to AREA4, AREA5 to AREA8).
Operation and settings
button to select a level.
or button to select a dwell time.
. The PRIVACY
or button

3D-DNR setting

1. Select [3D-DNR] option.
If pictures are not clear due to noise, this option would reduce
the noise of picture.
2. Use or button to select an option.
Note:
• If you set the AGC to [OFF] on the [EXPOSURE] menu,
the [3D-DNR] function is not available and [OFF] mark is
displayed.
• When you use this function, the afterimage may occur.
29