> RED: Set the desired red value.
> BLUE: Set the desired blue value.
Day/Night settings
1. Select [DAY/NIGHT] option.
2. Use
or
button to select a mode for DAY/NIGHT function.
•
AUTO: DAY/NIGHT mode changes automatically.
Note:
If you set the AGC to [OFF] on the [EXPOSURE] menu, the
AUTO mode of the [DAY/NIGHT] function is not available and
[---] mark is displayed.
> LEVEL: Use
or
> DWELL TIME: Use
•
DAY: Color mode enabled.
•
NIGHT: Black-and-white mode enabled.
36
button to select a level.
or
button to select a dwell time.
3D-DNR setting
1. Select [3D-DNR] option.
If pictures are not clear due to noise, this option would reduce
the noise of picture.
2. Use
or
button to select an option.
Notes:
•
If you set the AGC to [OFF] on the [EXPOSURE] menu,
the [3D-DNR] function is not available and [---] mark is displayed.
•
When you use this function, the afterimage may occur.
Operation and settings