Kyocera FineCam SL300R Instruction Manual page 114

3
Press
U
[EXECUTE] and then press the OK button
Card initialization begins.
4
When initialization is completed, the screen in step 2
reappears.
[POWER SAVE]
Forgetting to switch the camera off can cause the camera's battery charge to fall to a low
level. For this reason, the camera features a Power Save function that automatically
switches the camera off after several minutes if it is left switched on.
You can specify the delay until the camera is switched off.
1
Switch the camera on and press
button until the "
2
Press
6
U
[POWER SAVE] and then press
3
Press
U
the delay until the camera switches off and
then press the OK button
NO PWR OFF:
1MIN.:
3MIN.:
6MIN.:
4
The delay time is set and the screen in step 2 reappears.
6-6
on the 4-way button to select
Automatically to Save Power
" icon lights on the mode select LED.
G
or on the 4-way button to select
D
or on the 4-way button to select
D
The camera is not automatically switched
off. Take care to remember to switch the
camera off yourself.
The camera switches to sleep mode after 1
minute and switches off 2 minutes later.
The camera switches to sleep mode after 3
minutes and switches off 2 minutes later.
(default)
The camera switches to sleep mode after 6
minutes and switches off 2 minutes later.
Switching the Camera Off
or
O Q
.
R
.
E
ORMAT?
.
E
EXECUTE
CANCEL
on the mode
SET UP(2/3)
ORMAT EXECUTE
POWER SAVE 3MIN.
MODE LOCK O
+ 2
BEEP
+ 2
SHUTTER VOL
COLOR SELECT YELLOW
SET UP(2/3)
ORMAT NO PWR O
POWER SAVE 1MIN.
MODE LOCK 3MIN.
BEEP 6MIN.
+ 2
SHUTTER VOL
COLOR SELECT YELLOW