[Backlight] Changing The Monitor Backlighting Brightness; [Date] Setting The Camera's Date And Time; [Insert Date] Writing The Date Onto Image Files - Kyocera FineCam SL300R Instruction Manual

[BACKLIGHT]
Use this procedure to adjust the brightness of the LCD monitor backlighting.
1
Switch the camera on and press
button until the "
2
Press
U
[BACKLIGHT] and then press
3
Press
U
the [BRIGHT] or [LOW POWER] and then
press the OK button
BRIGHT:
LOW POWER: Restricts the backlight brightness to save
4
The selected brightness setting is applied and the screen in
step 2 reappears.
6
[DATE]
See "Setting the Date and Time" (
[INSERT DATE]
Use this procedure to specify whether the date is inserted on your
images.
• If images that were shot with [INSERT DATE] set to [WITH DATE]
are then printed with [PRINT] selected for [DATE] in [PRINT
SETTINGS] (
other.
• The date is inserted in the lower-right corner of the image. You cannot
erase an inserted date only.
6-4
Changing the Monitor Backlighting Brightness
" icon lights on the mode select LED.
G
or on the 4-way button to select
D
or on the 4-way button to select
D
.
E
Gives brighter backlighting
power.
Setting the Camera's Date and Time
p.1-6) in Chapter 1.
p.5-19), the dates will be printed on top of each
or
O
.
R
Writing the Date onto Image Files
on the mode
Q
SET UP(1/3)
F MODE
F METHOD
BRIGHT CNTRL
B CKLIGHT
D TE
INSERT D TE NO D TE
SET UP(1/3)
F MODE
F METHOD
BRIGHT CNTRL
B CKLIGHT
D TE
INSERT D TE NO D TE
SET UP(1/3)
F MODE
F METHOD
BRIGHT CNTRL
B CKLIGHT
D TE
INSERT D TE NO D TE
S F
SPEED
ST ND RD
BRIGHT
2003.01.01
S F
SPEED
ST ND RD
BRIGHT
LOW POWER
S F
SPEED
ST ND RD
BRIGHT
2003.01.01
003.09.01