[Format] Initializing Memory Cards - Kyocera FineCam SL300R Instruction Manual

1
Switch the camera on and press
button until the "
2
Press or
U D
[INSERT DATE] and then press
3
Press or
U D
[NO DATE] or [WITH DATE] and then press
the OK button
4
Date insertion is set and the screen in step 2 reappears.
• The default setting for this function is [NO DATE].
• If you set [WITH DATE], the date is permanently displayed in the lower-right corner of the LCD
monitor during shooting.
• If the background where the date is inserted is a bright color such as white or yellow, the numbers
in the date may be difficult to read.
[FORMAT]
This function should be used to initialize new memory cards before you use them or when
you want to erase all the data (including images) on a card.
• To ensure that you get the best possible performance from this camera, cards should be
formatted on the camera.
• Note that initializing a card also erases protected images.
1
Switch the camera on and press
button until the "
2
Press or
U D
[FORMAT] and then press
" icon lights on the mode select LED.
G
on the 4-way button to select
on the 4-way button to select
.
E
Initializing Memory Cards
" icon lights on the mode select LED.
G
on the 4-way button to select
.
R
or on the mode
O Q
.
R
or on the mode
O Q
SET UP(1/3)
F MODE S F
F METHOD SPEED
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2003.01.01
INSERT D TE NO D TE
SET UP(1/3)
F MODE S F
F METHOD SPEED
BRIGHT CNTRL FR MES
B CKLIGHT BRIGHT
D TE NO D TE
INSERT D TE WITH D TE
SET UP(2/3)
ORMAT EXECUTE
POWER SAVE 3MIN.
MODE LOCK O
+ 2
BEEP
+ 2
SHUTTER VOL
COLOR SELECT YELLOW
6-5
6