Table of Contents
Advertisement
Remote Control and Wireless
Sound
•
A sensor array
above the
screen of each
Video Player
receives command signals from the remote
control.
•
The sensor array also continuously transmits
wireless sound signals for reception on IR
wireless headphones.
•
See Video Player instruction guide in your
InfoCase for remote control instructions and
additional information on wireless
headphones.
12-Volt Master Power
•
The Video Players operate on
12-volt DC current. Turn on the
12-volt master power (TV)
switch shown, located on the
backwall of the top bunk.
NOTE: To avoid drain on the 12-volt house
battery, we recommend turning the
master power switch off when Video
Players will not be in use.
Video Player Power ON/OFF
•
Press the POWER button on either
the remote control or the unit once
to turn the power on. Press the
same button to turn the player off.
•
Push the open button (located on the front of
your screen) and lower the monitor to the
desired level. You may also adjust the swivel
angle.
To Play DVD
•
Insert the DVD label side
down (facing you) into the
slot on the side of the
player. The player will
automatically switch to
DVD mode. The screen will display the DVD
logo and begin to read the disc.
•
The DVD may load directly to the main title/
menu screen or it may begin to play previews.
You may be able to skip previews if desired by
pressing the NEXT button on the remote until
you see the main menu screen.
•
When the main menu screen appears, press
the PLAY button on the player or ENTER
button on the remote control to begin playing
the feature, or use the arrow buttons to select
the desired entry.
•
Volume is adjusted with the +/- buttons on the
player or the remote control.
To Play CD Audio (or CD Video)
•
The Video Player is also capable of playing
CD Audio music and CD Video discs.
•
Insert the CD label side down (facing you)
into the slot on the side of the player. The
player will automatically switch to proper
mode to play audio or video CD.
To Connect Game Systems or
Other A/V Components
•
Plug the audio and
video cables of the
game system or
component into the
audio-video input jacks at the rear underside
of the Video Player.
•
Switch the game system or component ON.
•
Press
button on Video Player to
AV
select. VIDEO 1 or VIDEO 2 input.
(The component logo or other
indication may appear on screen when
proper input is selected).
•
Operate game system or component using the
component's controller(s).
•
See Video Player instruction guide in your
InfoCase for more information.
Reading Lights
•
Push the light button to turn the
reading lights on and off.
SECTION 8 -
ENTERTAINMENT
AV
8-3
Advertisement
Table of Contents
