Easy-To-Use Functions; Swing Louver; Child Lock; Off Timer - Sharp DW-D20A Operation Manual

EASY-TO-USE FUNCTIONS

SWING LOUVER

During operation
Swing "ON" Swing "STOP"
Beep
During operation
Beep beep
Light off (STOP )
Beep
UP
Beep
DOWN
Beep
WIDE

CHILD LOCK

To prevent incorrect operation by children.
"Enable"
Beep
14
Do not forcibly move the louver with hands.
Otherwise, malfunction may be caused.
●
Press the button and set the louver at the
desired position. Then the indicator light
Beep beep
turns off.
Louver movement angle: Approx. 160°
(Reach of wind: Approx. 180°)
UP
DOWN
"WIDE" repeats "UP" and "DOWN" movements.
●
"Disable" Only the following operations can be
performed when the child lock is
enabled:
...
During operation Stop operation,
Beep beep disabling the child lock.
...
●
Stopped Disabling the child lock.
The child lock will be disabled when
the power plug is unplugged.

OFF TIMER

During operation
Select the desired time
Beep beep
Light off (cancel)
Beep
1
6h
Beep
4h
Beep
2h

PLASMACLUSTER ION ON/OFF

Turn the Plasmacluster ion on/off.
During operation
"ON"
"OFF"
1
Beep

NOTIFICATION SOUND OFF

Use this function when you do not want the notification sound to sound, such as night time.
Operation stopped
1
+
Press both for 3 seconds
●
This setting will be canceled once the power plug
NOTE
is unplugged and notification sound will sound.
●
You will hear a notification sound
(Long beep) once the preset time is
reached and the operation will stop.
●
The OFF TIMER indicator light will
change as the operation time
progresses.
●
When the water tank becomes full
during off timer operation, the
operation will stop but the off timer
counting will continue. (You may
continue the timer operation after
draining.)
●
To disable the off timer, press the
off timer button and turn the
indicator light off (i.e. cancel it).
●
Even if the Plasmacluster ion is "OFF",
if laundry deodorizing operation is
selected, the Plasmacluster ion will
automatically turn "ON".
Beep beep
(Tank full/End of Off Timer/End of Auto Off function)
●
A beep will sound and setting
Beep is complete.
●
When both the VERTICAL SWING
button and STOP button are pressed
and held for 3 seconds again, "beep
beep" will sound and notification
sound will be set to sound again.
15