Jungheinrich EZS 350 Operating Instructions Manual page 62

7.1.1 Discharge monitor function
The discharge limit has been reached when the
"Stop" symbol (57) lights up. When the discharge
monitor function is activated the travel speed is
reduced by half.
The maximum travel speed is only enabled again
when the battery is 70% charged.
7.1.2 Service hour display
The service hour display range is between 0.0 and
99,999.0 hours. The display (59) has background
lighting.
Z
For maintenance-free batteries a "T" (58) symbol is shown in the display.
7.1.3 Event Messages
The service hours display is also used to display event messages. The event
messages overwrite the service hour display. Event message start with an "E" for
Event and a four-digit error number.
The event message is displayed as long as the fault persists. If there are several
event messages they are displayed consecutively. Most event messages result in the
Emergency Stop being activated.
Z
Remedies, (see "Troubleshooting" on page 58).
7.1.4 Power up test
Once the truck has become operational the following displays appear:
– Display unit software version is flashed briefly
– Service hours
– Battery charge status
54
56
58
55
57
59
61