Jungheinrich EZS 350 Operating Instructions Manual page 53

Regenerative braking
Procedure
• Release the travel switch (5) - the travel switch (5) reverts to neutral.
The truck brakes to a halt regeneratively via the coasting brake. The service brake
then applies.
Z
Regenerative braking may not be sufficient on inclines. In this case inversion
braking must be applied.
Inversion braking
Procedure
• During travel, set the travel switch (5) to the opposite direction.
The truck brakes regeneratively until it starts to move in the opposite direction.
Z
The brake force can be set by the manufacturer's service department.
52