Jungheinrich EZS 350 Operating Instructions Manual page 43

Item Control / Display
7 Key switch and key
3 JetPilot
4 Emergency Disconnect
switch
6 CanCode
ISM
5 Travel switch
8 "Forward pedestrian
operation" button
Forward
9 Stop button
10 "Forward pedestrian
operation" button
Reverse
11 Trailer coupling
41 "Pedestrian" stop button
42 CanDis
43 JetPilot adjuster
44 Warning button
(Horn)
45 Operator platform
t = Standard equipment
42
Function
t – Activates the truck by applying the
control voltage
– Removing the key prevents the truck
from being switched on by unauthorised
personnel
t – Steers the truck.
t Disconnects the battery supply
– All electric functions are deactivated and
the truck decelerates
o Replaces the key switch
– Activates the truck by entering the
relevant code
– Travel program selection
– Code setting
o Replaces the key switch
– Activates the truck via a card /
transponder
– Displays readiness for operation
– Operational data acquisition
– Data exchange with card / transponder
t – Controls the travel direction and speed.
o – Travel starts in pedestrian mode in the
forward direction (V) (slow travel).
t – The truck decelerates at the maximum
rate until it comes to a halt.
o – Travel starts in pedestrian mode in the
reverse direction (R) (slow travel).
o – For towed load
o – The electrical functions are cut out and
the truck automatically brakes.
o Display instrument for
– Battery charge status
– Service hours
– Warning messages
– Parameter setting
t – The control handle can be set to the
required position
t – "Warning" button
t – released (without load): Travel inhibited,
truck can only move in pedestrian mode
– applied (with load): Travel enabled
o = Optional equipment