Jungheinrich EZS 350 Operating Instructions Manual page 35

Charging the battery
Requirements
– Park the truck on a level surface.
– Expose the battery, (see "Exposing the battery" on page 32).
– Disconnect the battery
Procedure
• Pull the battery connector (36) from out of the bracket (38).
• Remove any insulating mats from the battery.
• Connect the charger lead (37) of the battery charger station with the battery
connector (36).
• Switch on the charger / charging begins automatically.
The battery is now charged.
36
37
38
Completing the battery charge, restoring the truck to operation
NOTE
If charging has been interrupted, the full battery capacity will not be available
Requirements
– Battery charging is complete.
Procedure
• Switch off the charger.
• Disconnect the battery from the charger.
• Connect the battery to the truck.
The truck is operational again
34