Sony Trimaster PVM-L3200 Operation Manual page 62

Menu
Internal Signal
Function Switch
Scan Mode
Native Scan
16:9
H Delay
V Delay
62
Display Function Menu
Function and operation ([
Selects the internal signal display.
You can select from PLUGE, Gray (20% gray signal), White (100% white signal), 5 step (5
step gray scale signal), Ramp, Color Bars or Black (0% black signal).
To cancel the internal signal, select one from the channel numbers 1 to 30 with the numeric
buttons of the controller.
Note
Internal Signal is not set in the following cases:
• When the DVI Computer format signal or HDMI computer signal is input
• When Side by Side is set to On
Sets the function to be assigned to the function button of the controller in the menu.
Sets the scan size of the picture.
[Normal Scan]: Normal scan
Under Scan: 3% under scan
Over Scan: Mask of 5% over scan portion in the normal scan
Note
The scan size is not selectable in the following cases:
• When Native Scan is set to On
• When the input signal has no sync signal
• When the internal signal is displayed
• When Side by Side is set to On
Sets whether or not to display the native scan ([Off] or On).
Note
The native scan is not selectable in the following cases:
• When the input signal has no sync signal
• When Side by Side is set to On
• When Pixel Zoom is set to on
• When Format of the Input Configuration menu is set to DVI Computer (The native scan is
displayed regardless of the setting.)
• When the HDMI computer signal is input (The native scan is displayed regardless of the
setting.)
• When the signal system is the SD signal of 720 × 576 or 1440 × 576, Native Scan Mode is
set to Aspect Correction or ×2 and the internal signal is displayed (Native Scan is set to Off
and the normal scan is displayed regardless of the setting.)
Sets whether or not to display the aspect in 16:9 (Off or [On]).
Notes
• The aspect ratio is not selectable in the following cases:
– When Native Scan Mode is set to ×1 or ×2 and Native Scan is set to On
– When the input signal has no sync signal
• The aspect ratio may be fixed due to the signal format.
For details, see "Available Signal Formats" on page 102.
Sets whether or not to display in H delay ([Off] or On).
When the 720/24, 25, 30P signal is input, the display position is changed with the PHASE
knob.
Note
The picture is not displayed in H delay in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Video, DVI Computer or HDMI
• When Side by Side is set to On
• When the captured frame is displayed
Sets whether or not to display in V delay ([Off] or On).
Note
The picture is not displayed in V delay in the following cases:
• When the input signal has no sync signal
• When the internal signal is displayed
• When Format of the Input Configuration menu is set to DVI Video, DVI Computer or HDMI
• When Side by Side is set to On
• When the captured frame is displayed
]: factory setting)