Table of Contents
Advertisement
Menu
Dual Link HD-SDI
Composite
YC
Component
DVI
HDMI
Function and operation ([
When BKM-250TG is installed
3G/HD/SD-SDI Auto: Changes the format automatically according to the Sampling
Structure, Bit Depth, Picture and transport scanning method information for Payload ID
of SMPTE-352M standard superimposed on the input signals.
Note
You can confirm the Payload ID information and the signal format status of the current
monitor in "SDI Payload ID Status" (page 76) of the Status menu.
3G-SDI: Sets the signal format.
4:2:2 YPbPr 10bit
4:4:4 YPbPr 10bit
4:4:4 RGB 10bit
4:4:4 YPbPr 12bit
4:4:4 RGB 12bit
[HD-SDI/D1 Auto]: Changes the format automatically according to the format of the
input signal.
D1
Sets the Dual-link HD-SDI signal format when two BKM-243HS or BKM-244CC are installed
in the OPTION 1 and 2 or OPTION 3 and 4 option slots or BKM-250TG is installed.
4:2:2 YPbPr 10bit
4:4:4 YPbPr 10bit
4:4:4 RGB 10bit
4:4:4 YPbPr 12bit
4:4:4 RGB 12bit
Sets the composite signal format when BKM-227W is installed.
Auto: Changes automatically according to the format of the input signal.
It will take a few seconds to detect the format of an input signal. It is recommended that
a particular format be selected if it is determined.
NTSC
PAL
PAL-M
SECAM
Sets the Y/C signal format when BKM-227W is installed.
Auto: Changes automatically according to the format of the input signal.
It will take a few seconds to detect the format of an input signal. It is recommended that
a particular format be selected if it is determined.
NTSC
PAL
PAL-M
SECAM
Sets the analog component signal format or analog RGB signal format when BKM-229X is
installed.
You can select from YPbPr or RGB.
Sets the DVI signal format.
Video: Displays the CEA-861 signal.
Computer: Displays the computer output signal such as the VESA standard signal.
For each signal format to be displayed, see page 106.
Sets the HDMI signal format.
The 800 × 600, 1024 × 768, 1280 × 960, 1280 × 1024 and 1400 × 1050 signals are HDMI
computer signals in this manual.
For the signal format to be displayed, see page 107.
]: factory setting)
51
Input Configuration Menu
Advertisement
Table of Contents
