Connections; Connecting The Controller (Bkm-16R) - Sony Trimaster PVM-L3200 Operation Manual

Connections

Note on connecting the cable to the CONTROL
UNIT connector
Be sure to plug the male connector of the cable into the
CONTROL UNIT connector of the monitor.
Insert the connector so as to fit the shape of the CONTROL
UNIT connector.
Plug the
male
connector
into the
monitor.
24
Connections
Connecting the Controller (BKM-
16R)
Monitor
PEER TO
PEER
NETWORK
LAN
Set to PEER TO
PEER.
DC 5V/12V IN
Controller
connector
(BKM-16R)
NETWORK
LAN
PEER TO PEER
Set to PEER TO PEER.
1
Turn off the ?/a (main power) switch of the monitor
before connecting the units.
2
Set the NETWORK switches of the monitor and the
controller to PEER TO PEER.
3
Connect the LAN (10/100) connector of the monitor
and the LAN (10/100) connector of the controller by
using the SMF-700 or a 10BASE-T/100BASE-TX
straight LAN cable (shielded-type, optional).
Note
When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
4
Connect the CONTROL UNIT connector of the
monitor and the DC 5V/12V IN connector of the
controller by using the SMF-700.
CONTROL UNIT
connector
LAN (10/100)
connector
SMF-700, etc.
LAN (10/100)
connector