Introduction; Product Range; Operating Modes - GE Kilsen KFP-CF Series Operation Manual

Introduction

This is the access level 1 and access level 2 operation manual for the Kilsen KFP-CF
series fire alarm control panels. Read these instructions and all related
documentation entirely before operating this product.

Product range

The KFP-CF series includes the models shown below.
Model Description
KFP-CF2 Two-zone fire alarm control panel
KFP-CF4 Four-zone fire alarm control panel with fire routing
KFP-CF8 Eight-zone fire alarm control panel with fire routing
Fire routing on the four- and eight-zone models is not available for all operating
modes. See "Sounder and fire routing delays" on page 2.

Operating modes

Supported operating modes are shown in the table below. The default operating
mode is EN 54-2.
Table 1: Operating modes
Operating mode
EN 54-2 (default)
EN 54-2 Evacuation
EN 54-2 Scandinavia
BS 5839-1
NBN S21-100
NEN 2535
The choice of operating mode used depends on your location and the specific
regional requirements of your fire alarm system.
As there is no visual indication of the active operating mode, your installation or
maintenance contractor should provide full details of your configuration.
Kilsen KFP-CF Series Operation Manual
Region
European Union
European Union (Spain)
European Union (Scandinavia)
United Kingdom
Belgium
The Netherlands
1