GE Kilsen KFP-CF Series Operation Manual page 20

If there is a fire alarm the fire panel will exit the test and respond to the alarm as
configured.
Disabling fire routing or enabling disabled fire routing
To disable fire routing, press the general Disable button, and then press the Fire
Routing Start button.
Disabled fire routing is indicated as follows:
• The general Disable LED is steady.
• The Fire Routing Fault/Disable/Test LED is steady.
To enable fire routing, press the general Disable button, and then press the Fire
Routing Start button again.
WARNING: Disabled fire routing does not indicate a fault or operate if there is a fire
alarm.
Disabling expansion modules or enabling disabled expansion modules
To disable expansion modules, press the general Disable button, and then press
Enter.
Disabled expansion modules are indicated as follows:
• The general Disable LED is steady.
• The Expansion I/O Fault/Disabled LED is steady.
To enable the expansion modules, press the general Disable button, and then press
Enter again.
WARNING: Disabled expansion modules do not indicate a fault or operate if there is a
fire alarm.
16 Kilsen KFP-CF Series Operation Manual