Door Switch; High Limit Thermostat - Vulcan-Hart SG4D ML-114875 Service Manual

DOOR SWITCH

WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
1. Remove the top front cover as outlined under
Covers and Panel.
2. Disconnect the lead wires to the door switch.
3. Remove the switch.
4. Reverse procedure to install the replacement
switch and check for proper adjustment as
outlined in Door Switch under Service
Procedures and Adjustments.

HIGH LIMIT THERMOSTAT

WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
1. Remove the top four racks from the oven.
2. Remove the high limit thermostat cover/
mounting plate. It is located at the top of the
oven cavity.
– 17 –