Topcom Butler 1651 User Manual page 9

5.10.2 Handset ring volume
Press the volume button
to select the desired volume (0-5). Æ Press
the scroll keys
setting.
You can turn the ringer volume of each individual handset ON or OFF by
simply press and hold the
5.10.3 Base ring volume
You can change the ring volume of the Butler 1651 base.
When base is ringing. Æ Press volume key
5.11 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the
and hold the key again to un-lock the keypad.
When there is an incoming call, you can still answer the call by pressing the Line button
During the call, the keypad functions as normal. When the call is ended, the keypad will be
locked again.
5.12 Setting the dialling mode
There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press and hold the flash R button to toggle between dialling modes: Æ'PULSE' will appear
when set to pulse or 'TONE' when set to tone (DTMF) dialling Æ After 5 sec. the unit returns
to standby
You can change by accident the dial mode of the phone when pressing the
recall/Flash key 'R' for 5 sec in standby. The wrong dialling mode will
cause that the number isn't dialled correctly or isn't dialled at all.
5.13 Handset name
You can change the name that appears on the screen (max. 12 characters) during idle stage:
Press Menu button
-key. Æ Use the keypad to enter the new name. Æ Press the Menu/OK
by the Mute
button to confirm.
Topcom Butler 1651/Twin/Triple/Quattro
in standby. Æ The handset will ring in the current volume.Æ Use
key in standby.
key. Æ appears on the display and the keypad is locked Æ Press
twice Æ The currect handset name is shown Æ Delete the character
Topcom Butler 1651/Twin/Triple/Quattro
on base to increase or decrease ring volume
again to confirm the
.
9