Topcom Butler 1651 User Manual page 8

Topcom Butler 1651Twin/Triple/Quattro
When you are calling in hands free mode and you want to change the
volume, press the Volume button.
When you use the hands free function for a long time, the batteries will be
discharged faster !
5.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
Press the Mute button
. appears on the display. Æ Press the Mute button
MUTE symbol
to continue the conversation.
5.7 Setting the volume
During a conversation you can set the volume by pressing the Volume button
set the volume alternatively in between 1-5. You can also use the left/right button.
The hands free receiver volume is also adjustable as above described!
5.8 Paging
When you press the Paging button
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9 Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press and hold the redial button
'SHORT' for 100ms or 'LONG' for 250ms Æ The flash time setting will disappear after 2 sec.
from the display
5.10 Setting the ring volume and melody
5.10.1 Handset melody
Press and hold the melody button
melody (1-9) by means of the scroll keys
8
during a conversation. The microphone will be deactivated. The
on the base unit, the handset emits a ringing signal for
for 3 sec. Æ The display will show:
until the current melody is heard. Æ Select the desired
. Æ Press
again to confirm the setting.
Topcom Butler 1651/Twin/Triple/Quattro
again when you want
. You can