4.5.2 Class of Service Configuration
This section introduces detail information of Class of Service Configuration of Web Smart Switch; the screen in
appears and
Table 4-16
descriptions the Class of Service Configuration of Web Smart Switch.
Object
Enable High Priority
Allow to disable or enable the High Priority function. Default mode is Enable.
Port
Indicate port 1 to port 4 and port G1, port G2.
Port Base
Define per port Class of Service policy based on Port Base policy.
VLAN Tag
Define per port Class of Service policy based on VLAN Tag priority policy.
IP /DS
Define per port Class of Service policy based on IP / DS policy.
Apply
Press this button for save current configuration of Web Smart Switch.
Table 4-16 Descriptions of the Class of Service Configuration Screen Objects
VLAN Priority tag value define
High Priority
Low Priority
Figure 4-33 Class of Service Configuration Web Page Screen
IEEE 802.1p priority value from VLAN tag
User priority values= 4~7
User priority values= 0~3
Description
Figure 4-33
- 43 -