Table of Contents
Advertisement
The standard RJ-45 receptacle/connector
There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation
and color of straight cable and crossover cable connection:
Please make sure your connected cables are with same pin assignment and color as above picture before deploying the
cables into your network.
A.3 100Mbps, 100Base-FX, SMI type connector
The FSD-624SF is using Optolock POF connector that is mostly being used for IEEE1394b transmission. The followings
show the basic information and its installation.
Basic Information:
The Optolock POF connector will as like following screen.
Figure A-2: Optolock POF connector
The POF Cable should be a dual wire cable with 0.98mm optic core with cladding diameter 1mm.
Figure A-1: Straight-Through and Crossover Cable
Figure A-3: Optolock POF cable
- 56 -
Advertisement
Table of Contents
