Table of Contents
Advertisement
4.3.1 Port Configuration
This section introduces detail settings of per port on Web Smart Switch; the screen in
4-4
descriptions the Port Configuration objects of Web Smart Switch.
Object
Port
Speed Mode
Flow Control
State
Port Description
Apply button
Table 4-3 Descriptions of the Port Configuration Web Page Screen Objects
Figure 4-19 Port Configuration Web Page Screen
Allow choosing all or one port of Web Smart Switch for further management, the available
options is 1 to 4 and G1, G2.
Allow choosing various speed duplex mode from one specific port of Web Smart Switch,
the available options are shown as below:
Auto Negotiation
1000Full(1000Mbps Port Only)
100Full
100Half
10Full
10Half
Default mode is Auto Negotiation.
Allow to configure Flow control function of each port from Web Smart Switch, the available
options are Enable and Disable. Default mode is Enable.
Allow disable or enable one specific port from Web Smart Switch, the available options are
Enable and Disable. Default mode is Enable.
Allow input per Port Description of Web Smart Switch, up to maximum 8 characters allow.
Press "Apply" button for save current configuration of each port on Web Smart Switch.
Figure 4-19
Description
appears and
Table 4-3 &
- 27 -
Advertisement
Table of Contents
